20 Most Recent
Casio TE-2000 Cash Register - Page 5 Questions & Answers
SAM4S ER-380 How do I set the cash register to automatically print a second copy of the receipt after a transaction?
To set the SAM4S ER-380 cash register to automatically print a second copy of the receipt after a transaction, you need to follow these steps:
- Turn on the cash register and press the MODE key until you see the REG mode.
- Press the PROGRAM key and enter your password (the default password is 0000).
- Press the 3 key for PRINTING.
- Press the 1 key for RECEIPT.
- Press the 3 key for AFTER PRINT.
- Press the 1 key for DUP (Duplicate Print).
- Press the CASH key to save your changes.
Now, the cash register will automatically print a duplicate receipt after each transaction.
Just get E5 on screen and long whining sound after entering amount and department. Please help!
The error E5 on the NTS M102 cash register usually indicates a communication problem between the keyboard and the main board. The long whining sound may indicate a hardware failure. Here are some steps you can try to troubleshoot the issue:
- Turn off the cash register and unplug it from the power outlet.
- Wait for a few minutes, then plug it back in and turn it on again.
- Try entering an amount and department again. If the error and whining sound persist, try the next step.
- Check all cables and connections between the keyboard and the main board. Make sure they are securely plugged in and not damaged.
- If the cables and connections are fine, you may need to replace the keyboard or the main board. In that case, it's best to contact the manufacturer or a qualified technician for further assistance.
If your cash register is still under warranty, you may be able to get it repaired or replaced at no cost.
Sharp XE-A202 - how to change name of tax, on my machine it's tax 21% but I need to read it tax 23%, the rate is fine it's 23%.
To change the name of the tax on your Sharp XE-A202 cash register, you will need to follow these steps:
- Press the "Menu" button on the register.
- Use the arrow keys to navigate to "Program" and press the "Enter" button.
- Use the arrow keys to navigate to "Tax" and press the "Enter" button.
- Use the arrow keys to navigate to the tax rate you want to change, and press the "Enter" button.
- Use the arrow keys to navigate to "Name" and press the "Enter" button.
- Enter the new name for the tax rate (e.g., "Tax 23%") by using the number keys and then press the "Enter" button.
- Press the "Menu" button to exit the program mode.
It's worth noting that the process for changing the name of the tax may vary depending on the specific model and firmware version of your Sharp XE-A202 cash register. If you are unsure about how to change the name of the tax or if you need further assistance, I would recommend consulting the user manual or contacting Sharp's customer support for further assistance.
How do I erase my sales total for day
- First you do an X-Reading by turning the key to 'X'. This is mainly done to confirm the audit roll is working. This gives your Sales for the day.
- Then you do a Z-Reading by turning the key one more click to 'Z'. This prints another receipt and clears the daily totals.
NOTE: you can't totally erase because the totals need to be added cumulatively. All the data is kept along with how many Z Reading have been done since the machine was new. This is to stop f*r*a*u*d. (Fixya doesn't like that word).
Finally, full 'make model (what it is)' in all questions please. If it is one of those African Government approved hand held calculators, I would need that information to check. My reply was based on a full size point of sale till like a Casio with a money drawer.
Error code 20 on a Sam4s ER-5115ll. how do I clear it?
Hi,
if you've unplugged your device for 30 seconds and inserted the plug in a gain, that might help. Please also undo and changes that you've made prior to the error appearing. Otherwise, please check for the error code in the troubleshooting section the product manual.
Thank you.
When I turn it on, why does the beep continue?
Have the same problem. My son's is new with new batteries doing the same thing right out of the box. I've concluded the coil or wire is faulty. Hope to get it replaced soon and hopefully it will work. I'd assume it's a manufacturing defect due to the coil being assembled incorrectly or the wire has a short. Not going to tear into it to find out since it is new but If the next one is defective then we will go with different brand. I'm leaning towards a coil defect (the sensor at the end). Hope this helps
Receipt door won't click shut
Question moved from Cars and Truck, because I have never known a Car with a 'receipt door'. So let's guess the rest.
'make model (what it is)' in all questions, plus the problem you have.
So let's guess it is a cash register. Google
make model replacement parts
..
Not finding what you are looking for?