20 Most Recent Panasonic tc-p50ut50 plasma panel - Page 2 Questions & Answers

Vfo

Run a cleaning disc through it. Moving it dislodged dust onto the optics. Walmart and Amazon have them. The tracking optic is low intensity and fails pretest.

If your Panasonic computer model CF-29 just stays at booting up, there are a few things you can do to fix the problem. First, try resetting the computer by unplugging it from the power source and then plugging it back in. If that doesn't work, try holding down the power button for a few seconds to see if the computer will turn off. If the computer still won't turn off, you may need to remove the battery and then put it back in. If none of these solutions work, you may need to take the computer to a repair shop. I hope this helps!

If you have forgotten your password for your Panasonic CF-w5 and don't have the original reset disk, don't despair. There are a few ways that you can reset your password and get back into your account. First, try using a live Linux CD or USB drive. Many live Linux distributions come with a utility called "chntpw" which can be used to reset passwords on Windows machines. Once you have booted into your live Linux environment, open a terminal window and enter the following command: sudo chntpw -u <username> /media/windows/SAM Replace <username> with the username of the account you want to reset the password for. Once the command has been executed, you will be prompted to enter a new password for the account. I hope this helps! Here is the link:http://www.chntpw.com/download/

If you have a Panasonic KX-T7736 phone with one line not producing dial tone, there are a few possible causes. The first possibility is that the phone line itself is the problem. If you have another phone in the house, try plugging it into the same phone line and see if you get a dial tone. If you do, then the problem is with the KX-T7736 and not the phone line. The second possibility is that the problem is with the phone's internal wiring. To check this, unplug the phone from the wall jack and plug it into a different jack. If you get a dial tone, then the problem is with the first jack and not the phone. The third possibility is that the problem is with the phone itself. If you've tried the other two solutions and you still don't have a dial tone, then the problem is most likely with the KX-T7736 and you'll need to contact Panasonic for assistance. I hope this helps!

What to do if you have a Panasonic CF-RZ4 with a supervisor password If you have forgotten your supervisor's password for your Panasonic CF-RZ4, you will need to reset it in order to gain access to the BIOS settings. In order to do this, you will need to have a fresh copy of the BIOS file for your CF-RZ4. You can usually find this on the manufacturer's website. Once you have the BIOS file, you will need to use a program like 7-Zip to extract the contents of the file. Inside the extracted folder, you will find a file called "bios.bin". This is the file you will need to use to reset your supervisor's password. To reset the password, you will need to boot into the BIOS settings. To do this, you will need to press the F2 key when the CF-RZ4 logo appears on the screen. I hope this helps!

The record button on your Panasonic NX VX77 movie camera is likely located on the top of the camera, near the shutter button. If you can't find it there, try looking on the back of the camera, near the LCD screen. The built-in microphone is likely located on the top of the camera, near the record button I hope this helps.

Hi, Please factory reset your device before attempting to change the panasonic password. This will remove the password and any other data on the phone. If this extension is associated with voicemail, you would want to call the voice mail first and then listen for options to change password. Otherwise, please refer to the product manual's table of contents. Thank you.

https://help.panasonic.ca/english/support/operatinginstructions/q.asp

goggle for itor ask at Panasonic web site

1. Open Panasonic TV 2. look through the power board and motherboard for bloated capacitors 3. if any bloated capacitor is found change it with a new genuine capacitor 4. fix it back with the screws and turn it on

Hi, Please make sure that you've removed all of the discs, pressed the power button and Disconnect the AC mains lead before attempting to power on again. Thank you.

you repeatedly press the key and it will move to next letter

model number of scanner ? suggest looking in panasonic support for software https://panasonic.net/cns/pcc/support/scanner/download.html

Try replacing the ejection pin on the device that is responsible for retracting the disk bay.

redux 1. vastly shortee now that a few tooth pulled facts were told.16 year oLD PCXP loaded, many times and virus infected all times an is ALWAYS EXPECTED as XP is and was a huge VIRUS MAGNET.. You can not escape this fact, and is never good this nor is there a future with this PC.not withstanding kids allowed to play with dads PC while he sleeps and now BIOS LOCKEDlearn to keep PC in dads cave and the door locked, win.the CMOS battery is dead.there is no battery ever lasted for 16 years, ever .it is dead.and CAN NOT BE IGNORED. (CAN NOT)take it back to your tech and get it replaced , now.or better yet find a newer PC that can run or runs now w10. 64bit, not 32bit ever,Choices vast but this fact here works best shopping for good used PCs.this or better. i3 , gen 4 , 2013 or newer PCs or I5 or i7 or Gen 4 up)and winand have a future. with w10 -64bit only.if must be a laptop (why)?then buy one LAPTOP that the coin cell can be removed in under 1 day labor (noob time)and no collateral damaged flat cables or jacks. as most noobs do.and winask.my dell E6540 bottom comes off with 4 screws and coin is out in 5minutes work or less.facts. matter, when shopping.

Remove all the plugs to the phone jacks and all the power to remote handsets. Put one old style WIRED phone to the first incoming house line. That is normally larger and close to the door or basement. If that works, you issue is too many phones, or one that is faulty and hogging the line. Plug them all back in one at a time and check the line each time. If the first phone doesn't work, the issue is with your telecoms provider. Phone them and ask them to check the line. It is normally a fault in the group collection box out on the street.

Try typing "Biostar" in as the password. If that doesn't work, we have another option.
The first step would be to try removing the CMOS battery (the coin shaped battery inside the computer that keeps the clock working). Disconnect the laptop from any power source (AC adapter), and remove the main laptop battery. Third, you will have to remove the bottom plate of the Toughbook. Search YouTube for a disassembly video for your model of tough book. Once you've removed the bottom plate, you should be able to see the internal components. Connected to the system board by two wires will be the CMOS battery. After disconnecting the CMOS battery (carefully!), hold down the power button on the laptop for about ten seconds, then let the computer sit for a few minutes to ensure that it is completely devoid of power. You will then need to reinstall the laptop battery (the main, brick-shaped one — not the CMOS) and boot up the laptop. If all goes according to plan, you should be able to access the BIOS and turn off or remove the bios password. Now you can reassemble your Toughbook. Power off, remove the battery, reconnect the CMOS battery, and reattach the rear plate, and you're good to go!

No idea. I am in UK. Try fleabay.

Check the keyboard ribbon cable is connected properly!