20 Most Recent Casio Tk-3200 All In One Cash Register - Page 9 Questions & Answers

YOU NEED TO ASK THE MANUFACTURER WE HAVE NO CLUE

if you can post you are registered

All the programming manuals are here. https://the-checkout-tech.com/manuals/cashregisters/Casio7.php ..

If you google it;https://usermanual.wiki/Casio/CasioCasioCashRegisterQt6000UsersManual242873.1323227966/help

It sounds like you have the key in void mode. Make sure the key is turned to REG mode

Do it the same way as this model-https://www.youtube.com/watch?v=CVJUqFqStng

I have never seen this model but I did find a manual for it. It may be useful - https://the-checkout-tech.com/estore/catalog/product_info.php/cPath/21_104/products_id/2082/osCsid/j11ltq2gla2qnmaskoaqhl7hi4

Please check the model number. That is not a normal casio model number. Are you printing daily reports currently?

Usually if you do model A v. model B in Google, it will show the difference. In this case it doesn't. You would have to read both manuals. It may just be a year or two newer. The easy way would be to ask a Sharp POS dealer https://www.manualslib.com/manual/324804/Sharp-Xe-A202.html?page=7#manual https://wiki.hacdc.org/images/2/29/Cas_man_XEA203.pdf ..

Might be cheaper at Home Depot or Lowes

I used to have a pub with gaming machines and they were always refilled from the rear? Try disconnecting it from the mains for a couple of days. It probably has a small backup battery, but it may deplete during that time. Then the alarm should only go off when it comes to payout time. The circular pin tumbler locks are temperamental at the best of times and the tolerance to the locking bar is very tight. Normally you have to press the door hard and jiggle the key. The locks are easy to source and easy to replace one you get in. Or you could just drill it outwith a 3/8 carbide drill. ..

Your register is on the initialisation screen. This means it is ready for programming. This happens if the battery has not been replaced on time (usually about every five years). If the power is turned off when the battery is flat or faulty, the memory is cleared and all of your programming is lost. There is a slim chance that you still have the programming if the battery is not completely dead. Try this- 1.Turn power switch off. 2. Hold RECEIPT FEED button down while you turn power on. Keep holding the button for 5 seconds, then let go. 3. You should see the copyright message. 4. Press SUBTOTAL (or ST) 5. You should see a message asking for flag clear or init2. Make sure FLAG CLEAR is highlighted and press the YES button on the keyboard. 6. The register will now leave init mode and you can select register mode. You may have to sign on with your code or press the clerk button (however you normally sign on to use the machine). If the text is scrambled, or your product buttons do not work, you have lost the program and it will need full reprogramming. Either way, leave it turned on to charge the battery and see a dealer about having the battery (internal) checked.

https://www.youtube.com/watch?v=a3EeAOPmeSM

E14 is that the Receipt paper roll needs changing! http://office.manualsonline.com/manuals/mfg/casio/pcrt465.html?p=83 ..

Print a Z reading and that will print a total of what has not already been subject to a Z reading in the past.

wow and I know no one here that owns one either

Because it is defective

Yes!You can either rent or buy them, look at this:http://www.portcontainers.com/

Here is a great link about shipping container sizes: http://www.shippingcontainers24.com/dimensions/company/

Here's a website, with the smallest containers in the market:http://www.abccontainers.com.au/container-type/small-shipping-containers