Motorola MC9190-GST - Answered Questions & Fixed issues
Mc 9190 enter key
Hi there
Contact Motorola Solutions Get Support or Zebra Technologies
Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly.
Mark
Motorola Mobility Support
1/31/2015 7:51:51 PM •
Motorola...
•
Answered
on Jan 31, 2015
•
1,182 views
Screen Flickers
Motorola has had a lot of issues with the 9000 series displays.. your best bet is to RMA it. and get it fixed.
12/3/2013 8:52:43 PM •
Motorola...
•
Answered
on Dec 03, 2013
•
1,579 views
MC9190 WLAN Problem
To permanently disable the Suspend Mode on a MC9190:On your PC, create an empty text file, then type the 2 following lines:[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Timeouts]"BattSuspendTimeout" = dword:00000000 Save the file, then change the extension to ".reg". This changes the text file into a registry file.Copy the registry file in the /Application folder of the scanner gun. Cold boot the device. Your MC9190 will no longer go to sleep mode, or "suspend mode".To automatically enable the Wireless antenna at startup, create another registry file, then type the 2 following lines:[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WLAN]"InitialState"=dword:00000000Save the file, and copy it into the /Application folder of the scanner gun. Cold boot the device.
6/28/2013 2:19:21 PM •
Motorola...
•
Answered
on Jun 28, 2013
•
5,198 views
The MC 3300 scanner is frozen on a white background that has a blue motorola symbol. and says MC33X series
If your MC3300 scanner is frozen on a white background with a blue Motorola symbol and says MC33X series, you can try a soft reset to see if that resolves the issue. To do this, follow these steps:
- Hold down the power button until the scanner turns off.
- Wait a few seconds, then press the power button again to turn the scanner back on.
If the scanner is still frozen after attempting a soft reset, you may need to perform a factory reset. Please note that performing a factory reset will erase all data on the device and return it to its default settings. To perform a factory reset on the MC3300 scanner, follow these steps:
- Press and hold the power button and the volume down button simultaneously.
- Keep holding both buttons until the scanner vibrates and the Motorola logo appears.
- Release both buttons.
- Use the volume buttons to navigate to the "Factory Reset" option, and then press the power button to select it.
- Confirm that you want to perform a factory reset by selecting "Yes" using the volume buttons and pressing the power button to confirm.
- Wait for the scanner to reset and restart. This may take a few minutes.
If a factory reset does not resolve the issue, you may need to contact Motorola's customer support for further assistance.
2/24/2023 9:51:25 PM •
Motorola...
•
Answered
on Feb 24, 2023
•
53 views
Not finding what you are looking for?