Nortel Lot 16 Meridian M2616 M 2616 Phone W/ Nt2k22 Display 22 Programmable Keys - Answered Questions & Fixed issues


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Nortel Lot 16... | Answered on Apr 16, 2013 | 223 views


Answer> Manuals: If you want FREE manuals for your device, you must go directly to the maker of your hardware device. Look for their SUPPORT (Drivers and Downloads) and input the required data such as the Make, Mod. of the device in question. They will then take you to the proper section where Drivers and Manuals are located. Here you simply select the option you want to download and install your drivers or open a manual. Manuals often come down in PDF format and require Adobe Reader. Get Reader form http://www.Adobe.com .

Nortel Radio... | Answered on Dec 24, 2013 | 143 views


Make certain the AM/FM radio is off. You cannot squelch when it is on. Try adjusting again. If it does not stop the squelch noise, the switch is dirty or broken. To go further means taking it apart. You will try to "clean" the switch. Do you want to take it apart?

Radio... | Answered 2 hours ago | 12 views


What base is it, You need to read your question and figure that they can't read your mind, so post the complete question with all the facts.

Radio... | Answered 4 hours ago | 46 views


You should know better than to ask this in a public forum. It is ******* to increase the power on a CB radio. Try searching Google for that.

Radio... | Answered 4 hours ago | 42 views


There may be a button on the headset that will un-mute it, try holding the button down while wearing it, it may announce un-muted.

Radio... | Answered 4 hours ago | 44 views


Many police have gone to encrypted radio, so you may not be able to get that on most cheap scanners. even much more expensive scanners won't do it without a modification, but that is not legal to do that.

Radio... | Answered 4 hours ago | 57 views


Try using the manual if you can't see any button that say time, or menu on it. That radio is subject to a lot of complaints, that is what you get when you shop for cheap electronics. Some buttons have to be held down for a few seconds to get into a hidden feature, like setting the time.

Radio... | Answered 4 hours ago | 21 views


You might have to reset it, that is if it paired before with the same device. Know that Blue Tooth has different versions and some don't work with other versions of bluetooth. But your post sounds like it worked before you reset it, so it may just be that easy.

Radio... | Answered 4 hours ago | 23 views


Connect the headset to the charger as if you were charging it, but keep one side in your ear. Once connected to the charger, hold down the power button. It'll beep a few times and then stop. Disconnect from the charger. You can then turn the headset back on. This "procedure" clears the headset's memory,

Radio... | Answered on Oct 16, 2019 | 37 views


Radio Shack has a pretty good search feature for old instructions on their website. You will need their part number off the unit, which will be something like "20-321". Do a search and you can get a PDF instruction manual for it online.

Radio... | Answered on Oct 14, 2019 | 365 views


go to cellphones. This is radio communications

Radio... | Answered on Oct 04, 2019 | 49 views


Your antenna should not make any difference with power or receiving. Is the scanner mobile or in a room? Hard to imagine the connector being broken. You could test the antenna or even the BNC connector on the scanner. Try another antenna. If you wiggle it, does it start receiving? You may have a short in the BNC to the receiver. Other than that, look to power issues.

Radio... | Answered on Oct 04, 2019 | 46 views


Radio frequencies are different from country to country. NZ will use different frequencies than Canada. Canada and the USA have agreements in place because they border each other on what freq. is used for what. NZ likely has its own list. Your radio is not programmable to NZ frequencies. Sorry!

Radio... | Answered 6 hours ago | 38 views


It sound like your power supply is not providing enough output for the radio. Are you by chance using a wall wart for power? You need a dedicated 12 volt power supply, made by Astron, QJE, or Pyramid.

Radio... | Answered on Oct 03, 2019 | 94 views


you may have a bad squelch pot on the radio. try turning it fully in one direction an back in the other direction. it also could be that the Pot is dirty get some contact cleaner and open up the radio and squirt a very little cleaner into the open spot of the Pot. then rotate the know several times. if you do not have something like CRC QD Contact Cleaner you can get it in a good hardwood store like ACE or TrueValue, and even Home Depot. you can use only 91-99% Electronic Grade Isopropyl Alcohol, do not use the 70% Isopropyl Alcohol.

Radio... | Answered on Oct 03, 2019 | 30 views


you may have a broken wire in the radio itself? or there is a wire broken inside the mike itself not just the connector.

Radio... | Answered on Oct 03, 2019 | 52 views


you need to program the correct frequency. the Marine Channel 63A is 156.175Mhz. they also maybe using a PL Tone or a CTCSS tone, you have to find out what it is. using the Chirp Programing software you can do that. but remember sometimes a Cities use a non standard CTCSS tone so you can only hear each other

Radio... | Answered on Oct 03, 2019 | 82 views

Not finding what you are looking for?
Nortel Lot 16 Meridian M2616 M 2616 Phone W/ Nt2k22 Display 22 Programmable Keys Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Nortel Radio Communications Experts

Norm Pearl

Level 2 Expert

108 Answers

MrFixitSTTL

Level 3 Expert

320 Answers

ray gallant
ray gallant

Level 3 Expert

64309 Answers

Are you a Nortel Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...