Top 20 Nortel IP Phone 2002 NTDU91BD70E6 - Page 9 Questions & Answers

Many police have gone to encrypted radio, so you may not be able to get that on most cheap scanners. even much more expensive scanners won't do it without a modification, but that is not legal to do that.

go to cellphones. This is radio communications

if you just bought them, return the one that isn't working right for a replacement. it appears that there is a defect with that one, possibly a loose wire or bad circuit.

http://www.shercoares.org/doc_files/manuals/vx5r_om.pdf

Raymarine Ray55 Manuals Down Load user manual and reset MMSI according instructions.

I don't know the answer but if the audio isn't behaving as indicated in the vehicle handbook you should return to the dealer for an explanation or a fix as the car and the audio is clearly still under warranty.

Try this site for manuals. https://www.manualslib.com/

Contact Harwa directly to request the manual or information how to obtain it.

This usually indicates you are entering a frequency outside of the radios range. be sure you are using the decimal.

What about him? He always gets it wrong.....

On page 17, note the diagram on how to block the shaft. https://m.stihlusa.com/webcontent/cmsfilelibrary/instructionmanuals/stihl-fs-40-50-owners-instruction-manual.pdf

There may be a button on the headset that will un-mute it, try holding the button down while wearing it, it may announce un-muted.

Internal circuitry needs repair, which is a task for a repair shop with access to diagrams and test gear.

Contact Tait to inquire.

1. Find the "Settings" icon on your iPhone, which is normally on the home screen. 2. Open and click on the "General" button. 3. Then, hit the "Bluetooth" button and slide it over to turn the function on. 4. Your iPhone should find the device once this is enabled and should show the device name on screen. When it does that, you will need to hit the "Pair" button in order for the devices to sync. You may need to enter a four-digit password, which is provided with your wireless device. 5. Once that is entered, hit "Connect" on your iPhone to complete the setup. Your headphones should now be working properly. If your wireless earbuds are broken, then they can't be connected to any of your device. In this case, you can learn some new TWS wireless earbuds recommendations on: 10 Best TWS Wireless Earbuds

Depending on where you live, your county may have decided to go to the new 800 mhz band. Many county police, fire, ems, and 911 centers have gone to the new digital modes and moved to the 800 mhz band. Older scanners do not work well.

1. If the scanner is scanning, press MANUAL. 2. Using the number keys, enter the channel number where you want to store a frequency. 3. Press PROGRAM. BANK and the bank number, the selected channel number and CH, PGM, L/O (if the selected channel number is empty), and 000.0000 MHz appear on the display. 4. Using the number keys, enter the frequency you want to store into that channel, including the decimal point. NOTE: Your scanner automatically rounds the entered frequency up to the closest valid frequency. For example, if you try to enter a frequency of 151.473, your scanner accepts it as 151.475. 5. Press E to store the frequency. NOTE: If you enter an invalid frequency in Step 4, the scanner displays Error. Press CLEAR, then repeat Steps 4 and 5. 6. To program the next channel in sequence, repeat Steps 3-5. To program another channel (not in sequence), repeat Steps 2-5.

You should know better than to ask this in a public forum. It is ******* to increase the power on a CB radio. Try searching Google for that.

hi, try to make hard reset to both devices, regards, Daniel https://www.rylwy.com/diy-magnetic-loop