20 Most Recent Nortel Meridian M2616 Phone with LCD Display - BLACK - Page 4 Questions & Answers

I am not sure what type of car you have, but if it is reasonably modern, you will have what is called and "Active Antenna". This needs power and is usually powered from the car radio. I am sure that when the new radio was installed, this connection was missed. FM will work fine around town, but get a few miles outside, and you won't have anything. AM will be very noise or non-existant, as you have found out. I had the same broublem with a used car that I had purchased. Once I connected the power to the antenna up, I had AM stations coming in from 200 miles away, and FM for 75 miles or so.

Usually because the purchaser didn't read the instructions or because the instructions are badly written from Chinese. This is an eBay special. I wrote this Tip on connecting Bluetooth devices which mentions the step that is always missed. https://www.fixya.com/support/r26362721-pairing_bluetooth_devices

iEssentials Bluetooth FP1 Headset, USB Car Charger ...

https://www.ebay.com > itm iEssentials Bluetooth FP1 Headset, USB Car Charger Included ( IE-HFBLU-FP1 ) · Item Information · Item specifics · Shipping and handling · Sales Tax for an item # ... US$12.95 · ‎In stock

• Customer service.

Setting up the frequency on the radio is quite simple. It is nothing more than adjusting the UHF and VHF settings to compensate for the curvature of the earth.

It appears you can. Normally you load the software to the new PC and then copy the data file to USB and transfer it. It would be a file in USERS. Then reboot the computer. https://www.google.com/search?q=gs3000+scanner+on+one+PC%2C+transfer+that+data+to+a+new+PC ..

no factory reset --this is user manual page 36 is trouble shooting ----https://www.manualslib.com/products/Radio-Shack-Pro-135-3101070.html

Contact Relm directly to request the manual.

refer to instructions that came with unit, if you lost them google your model number manual. copy and paste https://www.fixya.com/support/t24668314-remove_entire_cutting_head_homelite_hlt ..

" of YOUR NTE1197 ". Nope we are Fixya dot com, so you have nothing of ours. Contact them, we are not they. https://www.google.com/search?q=nte+1197 ./.

Check the PA circuit. If an aerial was not connected or has a very high SWR, it will cook the output section.

The blinking light tells you it is on and working it is also part of the setup process The only two ways to stop it blinking is to shut down the headphones or dismantle the headset and disconnect the led

User Manuals are here;

http://support.radioshack.com/productinfo/DocumentResults.asp?sku_id=20-413&Name=Radio%20Scanners&Reuse=N





Best of Luck.

Hi, please reach out to your products manfucaturer and ask them to email you the diagram. Thank you.

Shows normal operation

As a licenced HAM Radio opperator, you will be aware of the legalities and the frequencies you are allowed to use. What is your question I wonder . ..........................................

Tip & How-To about Miscellaneous Pairing Bluetooth Devices Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks. Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is. Roughly speaking though. Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever. With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically. When the Android or iPhone device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes). Posted by ADMIN... on Nov 19, 2016 This manual is probably close enough for this fine Chinese device. https://fccid.io/2ASLD-P17/User-Manual/User-Manual-4196764 VIDEO https://www.google.com/search?q=bc-au-bs-206-bk+speaker+pairing ..

This unit looks to be a AC/DC PA amplifier. Here's an owners manual if you don't have one. That and a parts list is about all I could find. Mike http://support.radioshack.com/support_audio/doc73/73142.pdf

There's no manual available, but if you want to pair your headphones with a computer or a phone follow this steps: 1.- Fully charge headphones (leds turn from red to steady blue 2.- Press for 8 seconds the lower button on the right (it has a phone symbol) pressing the "phone" button will turn on the headphones, but if you keep pressing it will force the device to go to " Pair mode" you call tell is ready by noticing the LEDs turning blue and red. onces pairing is successful you will see a steady blue LED.

1. Go to your Phone's home screen and find the "Settings" icon. 2. Click on the "General" button under Settings. 3. Find the "Bluetooth" option and slide it over to turn the function on. 4. Your iPhone should find the device once this is enabled and should show the device name on screen. When it does that, you will need to hit the "Pair" button in order for the devices to sync. You may need to enter a four-digit password, which is provided with your wireless device. 5. Once that is entered, hit "Connect" on your iPhone to complete the setup. Your headphones should now be working properly. You'll have to look up specific instructions for your device by searching the model number. The pairing code will likely be 0000 or 1234