20 Most Recent
IBM 3581 Ultrium Ultrium Tape Drive - Page 7 Questions & Answers
How can I correct non system error?
The most common setup on BIOS boot order is the removable media first. IF there is a drive problem then that computer changes to the next item in the boot order. What you are describing is a failure to detect any of the boot devices. Check the CMOS battery to make sure it is ok. The easiest way to do this is by looking at the clock time and date on the BIOS screen. If it is wrong then the battery has died and the computer can not remember the devices. IF you had disk problem to start then the hard drive might have failed.
Ibm3490: has a tape stuck in the drive
Then raise a call with IBM Hardware:
How do I create a PMR (aka Service Request) for support?
http://www-01.ibm.com/support/docview.wss?uid=swg21507639
How to run safe mode
When you start the ComputerPress "F8" key repeatedly after the IBM logo appears, but before the
operating system logo appears.then when menu appears press Down key and Select Safe Mode & Press EnterIf the "F8" key doesn't work, restart the
computer and try pressing the "F11" key repeatedly.
Fru pn 02r4084
http://www.driverguide.com/driver/company/IBM/Sound-Audio/index.html
Password
Have you looked to see if there is a jumper you can use to do a bios reset.
Not finding what you are looking for?