Xitel Inport Deluxe - Audio Input Adapter - Usb - Page 9 - Answered Questions & Fixed issues
Dragonhawk tattoo gun
Friend had this same issue, here's how I fixed it, and hopefully it'll work for you (and anyone else with this issue.)
First is the copper screw thing at the top of the gun. It needs to be just barely touching the flexible metal bar below it. It's very finicky; the distance between too far away and touching it too much is very Very small. At the proper distance, it should hum and/or spark. Large sparks are normal when it's brand new; they'll disappear pretty quick though, so don't worry if it happens.
If it's humming and sparking properly but the needle isn't moving, it's probably that the needle guide (holder? nib? The translucent green part whatever it's called) could be too high up, causing the needle itself to get stuck and not have room to move up and down. Simply loosen the screw that holds the nib in place, lower it until the needle is only slightly exposed, and tighten the screw again.
It worked for my friends gun, so hopefully it'll work for yours too.
images are the full gun, close up of the copper screw thing, close up of the nib/needle, and diagram attempting to explain the nib distance a little bit more.
1/3/2024 6:59:10 AM •
Computers &...
•
Answered
on Jan 03, 2024
•
362 views
Battery discharged, not charging
No details given, but let's guess a laptop because you are in the category 'Computers and Internet'.
All questions need 'make model (what it is)' as first 3 words please.
Power down the computer
Remove the battery
Run the computer on mains power
Close down the computer
Unplug from the mains
Press and HOLD the Power button for a FULL 2 minutes.
Insert the battery, plug into the mains and power on.
If that doesn't fix it, you need a digital multimeter to check the battery charger unit is providing voltage at the connector plug, typically 11.1 volts or 14.8 volts, to as much as 19 volts.
Another possibility is that the power connection port has dry joints or damage to the motherboard connector through constant use.
..
12/31/2023 6:30:42 AM •
Computers &...
•
Answered
on Dec 31, 2023
•
32 views
I have a sunpak 72 n 1 SIM card reader but no CD how can I get one
A notice from Microsoft;
Note: Using Third Party Software, including hardware drivers can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the use of Third Party Software can be solved. Using Third Party Software is at your own risk.
You may find software by using google search or Bing, (other search engines are available) but it will be a download, not a CD.
12/29/2023 8:13:42 PM •
Computers &...
•
Answered
on Dec 29, 2023
•
31 views
Not finding what you are looking for?
