3Com (3CRUSB10075) 802.11g/b Wireless Adapter - Answered Questions & Fixed issues

http://www.support-and-drivers.com/download.php?mid=156737 If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_d799f810c7212a78

Hey, have you tried 3coms website for the driver?

1. Don't plug your WLAN USB adapter until setup finish and reset the computer
2. Download XP driver from 3COM in below link... make sure to select the correct one depending on the serial number of your adapter (starting with 0100/0200/0300)


http://www.wireless-driver.com/3com-officeconnect-wireless-54mbps-11g-compact-usb-adapter/

3. Double click and it will automatically unzip and may ask you again after unzip use recommend settings and click yes to use recommend settings and click yes to all to overwrite again the folder unzipped again but if didn't ask it is OK.
4. In the unzipped folder right click on the setup file and click properties then go to Compatibility tab. InCompatibility mode click "Run program in compatibility mode of" then chose Windows XP (Service Pack 2) and OK.
5. Click setup now and after installation finish restart your computer.
6. After reset plug you USB adapter and will take some time to install the driver.

http://webprd1.3com.com/swd/jsp/user/index.jsp?id=WUSB5

This link is for the vista driver and it is confirmed to work in windows 7. Per the link on a forum im going to add below this.

http://kampiabareh.blogspot.com/2009/11/download-driver-3com-3crusb10075-for_17.html

I decided to double check 3 coms site and found this:

http://www.3com.com/swd/jsp/user/result.jsp?selected=6&sort=effdt&sku=3CRUSB10075&order=desc

I hope this helps!

the driver for vista works olso with windows 7

No win7 will not recognize the xp drivers.... you need to download the latest drivers for win7 from the 3com support site...

I did not solve the problem. I chose an easier way. I just replaced the 3Com Wireless Adapter with a NetGear USB adapter for which I have security instructions.

Kind regards,
stigfred

are you using windows xp? vista? 98?

I'll guess at xp.(and that you're using the windows software to connect)

Double click the wireless connection icon in the bottom right (the one that flickered when you're online.

Click 'view wireless connections'

click 'change the order of preferred networks'

Now select everything on the list and delete it apart from your own.

Now click 'advanced'

make sure 'automatically connect to non-prefurred networks' is NOT ticked.

Click close, then ok.

You should be ok now.

Regards

Tony

Disable the 3com software from opening on bootup then go to run type in services.msc & press Enter then scroll down to Wireless Zero Configuration if its set to manual or disabled right click on it & click properties. Change Startup type to automatic & then press Start once you have done that you should be able to use the windows wifi tool instead of the 3com tool. Hope that works for you.

Sounds as if your router may need to be set to enable wireless connection and enable DHCP, this alocates your wireless adapter an I.P Address automatically. If this is alraedy the case, check the properties of your adapter to see if it's set to recieve I.P address automatically. If still no joy find your routers I.P. address and DNS address (this is what you type in your web browser to set it up). If your router is 192.168.2.1 or similair, set your adapter at 192.168.2.2 and the same DNS address normally 255.255.255.0. Restart both pc and router and try again. Also make sure network sharing has been set up via the XP wizard.

This is one of those Cuckoo! problems. Assuming you have enabled your wireless connections again, have you tried a system restore to a few days before you dissabled the connection to see if the settings as they should; revert back to before the problem. If all other devices work in usb ports can't be that, if the device works in another pc, can't be that, so it's back to the software driver or a usb controller problem, on your pc that cannot start the device.

Ok it is may be do you to system is old needs up to date , so that the video may not have downloaded completely from the source web portal. The media player present in your handset is outdated.

A very simple solution to r epairing all by yourself is getting help from handbooks, they're very detailed and complete in every way so for me it was my b est source to repair one of the top sites for this is https://big-manuals.com/

Time for a new mouse! I’m happy to help further over the phone at https://www.6ya.com/expert/joshua_ac64e182ed26f66d

I don't know anything about these units, nor do I have time to source any docs for you, but maybe you can try connecting a PC directly to the port your patch panel is connecting the the switch from, you can at least see if that port is working. My next and only other suggestion is to invest in a "LAN cable tester". In my area, you can find cheap ones for U$20. The tester will allow you to check connectivity between any two ports, and allows you to test both patch links and individual CAT5/6 cables. Good luck!

notify the police dept / person handling the case and let them know about the face book information

Use a brute force password solver or at best do a reset

Fixya offers advice to DIY people. With something like you are talking about, it would not be easy because of parts, and manufacturing processes. Also it might cost more to have it repaired than to get a new one.

Hi, I hope this link is waht you need. http://www8.hp.com/us/en/support-search.html?tab=1#!=&qryterm=3com 40 0483 001 ethernet&search_searchtype=s-002 If not please the exact model of your device. Good luck