20 Most Recent 3Com SuperStack II 3300 XM (3C16985B) 24x10/100 Mbps Networking Switch - Page 9 Questions & Answers

A serial number will be given to you once you purchase the program.

rgrgrgrobert,

Very good question.

ACK is actually one of the more self-explanatory acronyms in the Information Technology industry. It simply refers to "acknowledgment".

In your case, your logs are stating that your router is sending an acknowledgment to your wii's IP address to verify that it is present on the network. This will occur with any information exchange between your wii and the rest of your network. ACK is an integral part of the TCP/IP protocol, and is used in any exchange of data, regardless of whether a router logs it or not.

FYI: When posting any questions with your network, the information you want to keep private is anything that can be seen by the public (example: public IP addresses/domain names). Your wii's IP address in this case is most likely private (example: 192.168.0.x, or 10.1.1.x) and therefor inaccessible by the public, hence not a security risk.

Hope this helps! :)
- Joshua

PS: You can read up more on ACK and how it is implemented by the TCP/IP protocol. http://en.wikipedia.org/wiki/ACK_(TCP)

There is no "magic bullet" software that will "kill" the malware on a compromised computer.

The "Best Practises" approach for dealing with an infected computer is:

1. disconnect the computer from all networks;

2. backup all your files (CD/DVD writable, external hard-drive, or USB memory stick);

3. reinstall the Operating System, from trusted media;

4. enable the Windows Firewall;

5. connect to the network;

7. download/install anti-virus software;

8. run Windows Update and Microsoft Update, to get all security patches;

9. reload your files from the backup.

Try here, download link at bottom._
http://www.generalmanual.com/Home-Sewing-Embroidery-Machines/Brother-CE-4000-Sewing-Machine.htm

Please rate accordingly

In order to connect a switch to a switch, unless it is auto sensing you would need a crossover cable

resets the original bios settings then save the original settings

http://rapidlibrary.com/index.php?q=zsmc+zs211
questa esta rapid share ...no lo so si esta libera or con dinero... ma
jo lo trobato a driver guide...esta la posibilita que tu devi fare un log in acont ...si tu no ti manage email me on catalin_yo_vlad @yahoo.com ...Jo tengo un acount e posso descargar per te ...e mail atach ..
escusar mi lingua ...sonno romano ..i no say securo di tu stai Italiano or spaniolo ...ma Jo te intendo a te perfecto..ok??
http://download.driverguide.com/driver/ZS211/ZSMC/d1276977.html
this second one is safe ...but you have to make an free acount for download permision ...
(il secondo sta securo ..ma devi fare uno log in acount per gratis...no money ..:P)

Use the search engine /downloadanystuff.org/ for
downloading any driver. Just search for any
software/driver name/downloadanystuff.org/
and you will get the best link to the same. Click on
the category Software/Driver if you want to refine
your search.Its cool and finds almost all FREE sharewares etc

harish...............

i have a old techcom web camera of 2003 model.i want to download and install drivers to run camera.

plz tell me solution

To DL Software for your Camera
Go to this website


http://europe.nokia.com/A4143121

Here is a link to a common Layer 3 switch.
http://www.cisco.com/en/US/products/ps6021/index.html

3. Configuring your Cisco Router If you have just turned on the router, it will be completely unconfigured. If it is already configured, you may want to view its current configuration. Even if it has not been previously configured, you should familiarize yourself with the show commands before beginning to configure the router. Enter privileged mode by issuing the command enable, then issue several show commands to see what they display. Remember, the command show ? will display all the showcommands aavailable in the current mode. Definately try out the following commands:
Router#show interfaces
Router#show ip protocols
Router#show ip route
Router#show ip arp When you enter privileged mode by using the command enable, you are in the top-level mode of privileged mode, also known in this document as "parent mode." It is in this top-level or parent mode that you can display most of the information about the router. As you now know, you do this with the show commands. Here you can learn the configuration of interfaces and whether they are up or down. You can display what IP protocols are in use, such as dynamic routing protocols. You can view the route and ARP tables, and these are just a few of the more important options.
As you configure the router, you will enter various sub-modes to set options, then return to the parent mode to display the results of your commands. You also return to the parent mode to enter other sub-modes. To return to the parent mode, you hit ctrl-z. This puts any commands you have just issued into affect, and returns you to parent mode.

Hi,

Have you try downloading from 3com web site. Here's the link:

http://www.3com.com/products/en_US/downloadsindex.jsp

let me know if you can't find the driver.

Joe

Contact the vendor or manufacturer.

Plz check following links:

http://cr.am/framed.php?url=http%3A%2F%2Fatoz.org.cn%2Fdownload%2Fdrivers%2FST268.zip&ref=driverguide

http://members.driverguide.com/driver/detail.php?driverid=749549

http://cr.am/framed.php?url=http%3A%2F%2Fwww.siptronic.com%2Fdownloads%2Fsiptronicst268sipusermanual.pdf&ref=driverguide

I guess you have a single incoming internet connection and wish it to be shared.

You only require one DSL / Cable router. To share this connectivity you will need Ethernet / Cat5 or wireless.

An ethernet switch or hub will enable you to extend connectivity.

All cable should be CAT5e or CAT6.
Suggest you consider the slightly more expensive switches that have auto-uplink. The negates the need of crossover cables.

Regards B.

Checkout Dell's support page at http://support.dell.com

You can enter the service tag of the computer and find all the downloads. If you don't see what you need, you should also be able to start a chat with a Dell tech support person for free. The can point you to the correct place on their site to download the software.

You can find all the relevant information here:

http://portforward.com/english/routers/port_forwarding/3com/3CRWE554G72T/eMule.htm

Well if you installed xp and do your updates xp should find all you need, Since installing xp on computers i havent any reason to install motherboard disc. If there is a problem in device manager go to the website of the manufactor for the drivers.