20 Most Recent Sharp XR50SL: Notevision XR-50S Multimedia Projector - Page 5 Questions & Answers

The electrolytic capacitors are probably not doing their job. Seriously, how old is this device? Recapping would be time consuming or expensive. The reason it shuts of when you hit the enter key is that there is not enough energy in the caps to supply the peak current needed for the operation.

Remove all the connectors to the main boards and then plug them back in, this can be caused by a poor connection between boards.

I think this Tv is not compatible with Amazon Prime video. You should confirm from Amazon Prime Support.

Might get help here .. manual http://siica.sharpusa.com/product-downloads Battery ... https://www.google.co.uk/search?client=firefox-b&dcr=0&ei=EzH-WY_oLtHDkwX44IDIDw&q=Sharp+Viewcam+VL-E37u+battery+charger&oq=Sharp+Viewcam+VL-E37u+battery+charger&gs_l=psy-ab.3...2427.9131.0.9787.16.16.0.0.0.0.188.2111.0j13.13.0....0...1.1.64.psy-ab..3.4.664...33i21k1.0.k-m1JkFeeJU

Sharp does not natively support or provide a PCL6 driver for this device. That being said, another possible workaround to provide you with a PCL6 driver for this is to try the HP Universal Print Driver for Windows PCL6 x64bit. This driver simply prints direct to the IP address that the printer uses on the network. You may sacrifice a few special features of the device using this driver, but I've had excellent success with it and recommend trying it.
Here's a link to the driver:
http://hp.driversdown.com/hp-drivers-download/HP-Universal-Print-Driver-for-Windows-PCL6-x64_18967.shtml
Hope this helps!

Download the manual here: http://dl2.opendrivers.com/dl_file.php?dl=dl2&brand=multifunction%2Fsharp-electronics&file=MXM282N-M362N-M452N-M502N_OM_Online-Manual_GB.pdf&check=a35c9re0e86ed5&driver=cs6f4548 dl2 opendrivers com

Hi there, I could not find instructions for that particular model, but there is a video here for Hard Drive removal for a SHARP AR-M355 - which I think is similar: https://www.youtube.com/watch?v=6s_TcQrGVhQ&t=16s I hope this helps!

Use a string to wrap around the table and pulley to get close approximation of size. Reduce number by a smidge and get that.

its gone no return