Top 20
Nortel LG-IP Phone 8830 VoIP phone - Page 7 Questions & Answers
Nokia 2760 - how do I edit speed dial no 1?
Number one is normally permanently locked to your answer machine. Most phone manufacturers use this as a standard layout so you will not be able to reprogram it to a different number.
5/30/2023 12:19:28 PM •
Lands Phones
•
32 views • 1 helpful votes
The phone will not register
Is there a question? You want to know how to Register every system phone or every system phone handset for every home phone ever made?
Google
make model (phone) / (phone handset) will not register
Normally it is because there is the maximum number of phones on the system, or a phone has been removed. You have to use the old phone to deregister it on the system before adding a new one.
5/12/2023 5:49:31 PM •
Lands Phones
•
38 views • 0 helpful votes
How do I retrieve phone numbers on calls comin in?
Retrieving phone numbers on incoming calls is easy! All you need to do is enable caller ID on your phone. This will allow you to see the phone number of the person calling you. Once you have caller ID enabled, you can easily keep track of who is calling you and when. Plus, you can even add the numbers to your contacts list for easy access in the future.
4/19/2023 7:42:10 PM •
Lands Phones
•
61 views • 0 helpful votes
How to clear all blocked calls from my KX-TG7871
To clear all blocked calls from your Panasonic KX-TG7871 phone, follow these steps:
- Press the "Menu" button on the handset.
- Use the up and down arrows to scroll to "Settings" and press "Select".
- Scroll to "Call Block" and press "Select".
- Scroll to "Block List" and press "Select".
- Use the up and down arrows to highlight the number you want to unblock.
- Press the "Erase" button, then press "Yes" to confirm.
- Repeat steps 5 and 6 for all numbers you want to unblock.
- When you are finished, press the "Off" button to exit the menu.
Note that if you want to clear all blocked calls, you will need to go through the list and erase each number individually. There is no option to clear the entire block list at once.
2/16/2023 9:48:45 PM •
Lands Phones
•
225 views • 0 helpful votes
My NEC-SL1000 all locals no dial tone and only blue steady solid light appears.what should be the problem
A steady blue light on your NEC-SL1000 system usually indicates that the system is in standby mode. However, the lack of a dial tone on all local lines indicates a problem with the system or phone lines. Here are a few steps you can try to troubleshoot the issue:
- Check the phone lines: Make sure that all phone lines connected to the system are properly connected and not damaged. If you have multiple lines, test each one individually to determine which line is causing the issue.
- Restart the system: Turn off the system and unplug it from the power source. Wait for at least 10 seconds before plugging it back in and turning it on again.
- Reset the system: If restarting the system doesn't work, you may need to perform a system reset. Refer to your user manual for specific instructions on how to reset your NEC-SL1000.
- Contact a professional: If none of the above steps work, you may need to contact a professional NEC-SL1000 technician to diagnose and fix the issue.
It's also possible that the steady blue light is indicating a different issue altogether. Again, refer to your user manual or contact a professional for further assistance.
1/17/2023 2:31:15 AM •
Lands Phones
•
104 views • 0 helpful votes
KX-DT333 night mode message bank is not working
The problem you're describing with the KX-DT333 night mode message bank not working could be caused by several factors. Here are a few steps you can try to troubleshoot the problem:
- Check the night mode settings: Make sure that the night mode settings are configured correctly and that the message bank feature is enabled.
- Check the message bank settings: Make sure that the message bank settings are correct and that the message bank is not full or locked.
- Check the phone's firmware: Make sure that the phone's firmware is up-to-date and that there are no glitches or errors.
- Check the phone's connection: Make sure that the phone is properly connected to the telephone line and that there are no loose or damaged connections.
- Consult the manual: Consult the manual for specific troubleshoot and service information for your KX-DT333 model
1/11/2023 10:00:23 PM •
Lands Phones
•
101 views • 0 helpful votes
Getting a busy signal when I'm trying to check the voicemails on MLS-18D.
It sounds like there may be a technical issue with your phone system after the power outage. Here are a few troubleshooting steps you can try to resolve the issue:
- Check the phone connections: Ensure that all the cables and wires are connected properly and securely. If you find any loose connections, plug them in firmly.
- Reboot the phone system: Try restarting your phone system by unplugging the power cord and waiting for 10-15 seconds before plugging it back in.
- Reset the phone system: Depending on your phone system, you may be able to perform a factory reset to return it to its default settings. This process will erase all the data and settings on the phone system, so make sure you have a backup of important data before doing this.
- Contact your service provider: If the issue persists, you may need to contact your phone service provider to troubleshoot the issue further. They may be able to identify any network or system problems that are causing the busy signal and provide additional support to help fix the issue.
I hope this helps you resolve the issue with your phone system and restore its functionality.
2/14/2023 6:05:22 PM •
Lands Phones
•
37 views • 0 helpful votes
Can be this use for handpiece?
probably, except we have no idea what 'this' is and what you want to use it for.
'make model (what is it) in all questions please, with a question and some sort of explanation.
"I have a Nortel 1006B Desk Phone and wonder if I can use the handpiece on my Cobra CBX-20, CB radio as a microphone"?
2/18/2023 2:40:39 PM •
Lands Phones
•
30 views • 0 helpful votes
Not finding what you are looking for?