Top 20 Nortel LG-IP Phone 8830 VoIP phone - Page 2 Questions & Answers

You need to delete old messages - the limit is 50. follow the display when using the VoiceMail retrieval method you regularly do.

here's a link/site I found hope tis your system https://pbxbook.com/norstar/line.html

The system administrator must reset your password - it will default to 0000. advise if you are the system admin.

Try reversing the polarity of the phone line - some Central Office equipment reverses the line voltage to indicate Message Waiting. Your jack may be miswired (for a lot of phone equipment, polarity doesn't mattter).

PLUG OUT THE CORD AND PLUG IT BACK IN .

F983 and F985 are voice mail access feature codes. Try rebooting your voice mail system to see if the unit recovers. There is no switch so you will need to unplug the power to the VMS to reboot.

If the display also goes off during the time of all the lights flashing on and off it sounds like you have a bad phone and it will need to be replaced. Try a different phone to see if you still experience the same issue.

If the phone doesn't ring when called by the extension number of the phone then try to use the volume up button while someone is calling the phone. The volume is a multi-purpose button that doubles for phone volume and ringer volume. However, the only way to turn up the ringer is when a call is coming into the phone.

here

Need more info.

google m7324 user card, you can also google norstar feature codes.

check your notification settings

https://www.florenceinc.com/docs/en/Vista100-e.pdf Hope this is what you were looking for

Feature # 8 7 1 should turn it off.

Yes you can. Unplug the base station and plug the wired set in its place.

Feature **CONFIG, Teeminals&Sets, enter set #, Telco Features, 1stDisplay, use Change softkey to cycle between Number, Line, Name Rls to exit programming. You need a CI line card in the KSU.

First, you've posted this is Nortel Phones, while your model is an NEC - you might have more luck posting in the NEC section. When you do, it would help if you add more detail on which button (sp?) stays lit. If it's Call Forward, a second push should turn it off. If it's Message Waiting, you probably have to access voicemail.

check the manual for it or get that info on the net

It can't find it's base station. If the base is in fact connected, you need to power-cycle it ( unplug then re-plug ) and use the wireless handset menu to "send SS code" within the first 30 (or so ) seconds after power-up. Best way is to get to the "send code" menu entry on the handset first, then unplug/replug the base power and press the "send" softkey right after.

You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.