Top 20 Hyundai 2010 Santa Fe GLS Questions & Answers

bluegreen display and which has amber? 2010 Hyundai Accent Blue Hatchback Radio no idea about the amber seen a lot of replacements fitting better aftermarkets looks like they all wire in the same 2010 Hyundai Accent Car Stereo Wiring Instructions ModifiedLife com

Cylinder #8 misfire

Take the sonata to your dealer for a firmware update of the radio system, it is a free service

A model number would help.

Try http://www.remotes.com/

Zoom in on the picture of the original remote provided on the site and get the actual remote model number.

Search the web or eBay "(model of the device or the remote) remote". Usually cheaper than the vendors.

Hi,

Here is what I found for One-For-All URC 7781 remote codes for Hyundai: 0037, 0865, 0556, 0706, 0860, 0753, 0698,137. I can't find any specific model but generally for Hyundai appliances, those are the codes you can use. There is a universal remote control with "Teach" mode where in you don't have to program or pair. It just automatically controls your appliances.

I hope I am of help to you. Thank you for visiting FixYa!

M/s. Suyash Sales & Service
Plot No.99, Khasrra No.54, Industrialarea,
Near Ranbaxy,
Nanglipoona.
New Delhi - India.
Phone No - 30308282
Email: [email protected]

M/s. Boscos
B-218, Naraina Industrial Area,
Phase I ,
New Delhi - India.
Phone No - 30308282
Email: [email protected]

M/s. Falcom Engineering Services
477, FIE,
Patparganj,
New Delhi - India.
Phone No - 30308282
Email: [email protected]

Please try to put in an ordinary audio CD track and see if this is detected. If yes the optical is working, if not there is no laser scanning and the possibility of the head being faulty is high.
Now certain cleaner disks are not read and so will not be tracked. Hence it might reject but the best is for cleaning manually the laser head eye with a cotton bud very softly and without any pressing of the lens eye after removing the unit -ONLY if there is NO WARRANTY. other wise claim your warranty..
If there is still no result then watch the CD if it spins or tries to spin. If the head unit moves up or down to focus or in and out of the drive, if so the board seems to work correctly and the possibility of the optical head being the suspected fault is closer.
The possibility of the processing board having an error is also high.

The unit has to set in surround mode. There should be a button on the unit that says surround or effect..

Try to do the auto code search option, many universal remotes have this option if you do not have the 3 digit enter code, basically it will cycle through all avaiable codes until the Hyundai react to one. See instuction manual of the remote if it`s available.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

Question edited for clarity, 'make model (what it is)'. The images show the rear connections. It looks like 2 x 1/2" jacks and a multi-pin connector for a sound mixer. I have never heard this term before? Passive stage monitor. Uses speakon connection. It is this

Speakon connector

Wikipedia https://en.wikipedia.org > wiki > Speakon_connector Speakon connectors arrange their contacts in two concentric rings, with the inner contacts named +1, +2, etc. and the outer contacts connectors (in the four- ... The company has disowned it! https://harbingerproaudio.com/manuals/

Harbinger HX121M 12" Stage Monitor

Musician's Friend https://www.musiciansfriend.com > pro-audio > harbinge... 12" loudspeaker featuring a 2.5" high-temperature, precision edge-wound polyamide voice coil and an 80 oz. vented magnet structure.

Harbinger HX 121m Passive monitor

Reverb https://reverb.com > Pro Audio > Speakers > Harbinger Passive stage monitor. Uses speakon connection. ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour. Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min. How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .

Probably nowhere as this is an Amazon / eBay special so made in China. You should be able to go to Windows Settings, - Hardware and tell Winderz to find a compatible driver. https://www.google.com/search?q=VIBE+SOUND+USB+Turntable+Model+VS-2001-USBT+drivers ..

Questions edited for clarity, full 'make model (what it is)'.Spray the buttons with Electrical Switch Cleaning Fluid Spray. It is an old unit and the contacts are probably dry.https://www.google.com/search?q=CR-06PL..