Sony Ericsson K810i Unlocked, Cyber Shot Cell Phone - Page 8 - Answered Questions & Fixed issues


Hello Jim, for what you say, the arm of your tray returns before you finish reading the disc?
If so, it may be that the return system of the arm is stuck or missing cleaning or lubrication, if you have the knowledge, should review the operation of said system, suggestion, remove the lower cover of the tray and aopye the tray in four high legs, which allow you to see the operation of the mechanism and see if it is working free or stuck
If not, go to a specialized technical service
Greetings Franco Dosil

Hola Jim, por lo que expresa, el brazo de su bandeja retorna antes de que termine de leer el disco?
Si es asi, puede ser que se encuentre trabado o falto de limpieza o lubricacion el sistema de retorno del brazo, si tiene los conocimientos, deberia revisar el funcionamiento de dicho sistema, sugerencia, retire la tapa inferior de la bandeja y aopye la bandeja en cuatro patas altas, que le permitan ver el funcionamiento del mecanismo y ver si esta trabajando libre o atascado
si no, concurra a un servicio tecnico especializado
Saludos Franco Dosil
https://www.manualslib.com/products/Technics-Sl-Bd20-Service-2611757.html

Audio Players &... | Answered on Apr 24, 2019 | 38 views


Just google it. We live in the 21st century, not to ask questions like this.

Audio Players &... | Answered on Apr 24, 2019 | 35 views


Hello Bernard, your Pioneer AX-311, is a two-channel, stereo amplifier, you can connect your Samsung TV, if it has audio output L and R, to an input of the Pioneer, say for the AUX input, what will get, is to listen to the sound of the TV in your Pioneer, in stereo, two channels, you can not have surround sound, because your Pioneer does not have that benefit
At the most, you can hear the sound of Samsung on the TV and the amplifier simultaneously, and you will hear a sound delay between the Pioneer and the Samsung
I hope my answer was useful
Greetings Franco Dosil

Hola Bernard, su Pioneer AX-311, es un amplificador de dos canales, estereo, usted puede conectar su TV Samsung, si tiene salida de audio L y R, a una entrada del Pioneer, supongamos por la entrada AUX, lo que va a obtener , es escuchar el sonido del televisor en su Pioneer, en estereo, dos canales, no podra tener sonido Surround, porque su Pioneer no posee esa prestacion
A lo sumo, podra escuchar el sonido del Samsung en el televisor y el amplificador simultaneamente, y se escuchara un retardo de sonido entre el Pioneer y el Samsung
Espero que le haya servido mi respuesta
Saludos Franco Dosil

Audio Players &... | Answered on Apr 23, 2019 | 29 views


Hello Jane, you are asking for a 490 Jensen CD, that your door does not close, because it is not locked with that action, or does not close because it does not reach the end of the route, so that it is locked?
In both cases, check that there are no 7 strange elements, inside the CD compartment and also that the door locking mechanism is in the closed position, making it impossible to close the door, in this case, using a thin element, you can unlock the lid closure by pushing it down and then stop pushing and check if the defect was corrected
I hope your answer has been useful
Greetings Franco Dosil


Hola Jane, usted esta preguntando por un CD 490, Jensen; que su puerta no cierra, porque no queda trabada con esa acci?n, o no cierra porque no llega al final del recorrido, para que quede trabada?
En ambos casos, verifique que no hay 7 elementos extra?os, dentro del compartimiento delo CD y tambi?n que el mecanismo de traba de la puerta se encuentre en la posici?n de cerrado imposibilitando que cierre la puerta, en este caso, utilizando un elemento fino, puede destrabar el cierre de tapa empujando el mismo hacia abajo y luego dejar de empujar y verificar si se corrigi? el defecto
Espero le haya servido mi respuesta
Saludos Franco Dosil

Audio Players &... | Answered on Apr 23, 2019 | 18 views


Hello John, before changing the belt, clean the surfaces where the belt will work?
You should clean the belt, with a little alcohol, on the plate, then clean the motor pulley, also with alcohol, if you can remove the plate, check that the axis of rotation does not generate jumps or hardening
I hope the information has been useful
Greetings Franco Dosil

Hola John, antes de cambiar la correa, limpio las superficies donde va a trabajar la correa?
Debe limpiar en el plato, el sector donde trabaja la correa, con un poca de alcohol , luego limpie la polea del motor, tambien con alcohol, si puede retirar el plato, compruebe que el eje de rotacion no genere saltos o endurecimientos
Espero que le haya servido la informacion
Saludos Franco Dosil

Audio Players &... | Answered on Apr 22, 2019 | 31 views


Believe it or not... Try this: (it's happened to me)

Take all the remotes (tv, cable, stereo etc.) out of the room and into a drawer or under a pillow. If it solves the problem... replace the batteries in the remotes. Problem solved!!! Sometimes when some remotes get low on battery juice, they send out random signals without you pressing any buttons. Hope it works.

Audio Players &... | Answered on Apr 22, 2019 | 42 views


Free instructions for one model yogurella. You can respond with more information to add to your question using the Comment menu. http://www.manualsdir.com/manuals/20456/ariete-yogurella-metal-620.html?page=13

Audio Players &... | Answered on Apr 20, 2019 | 19 views


I believe this unit employs an optical sensor to detect tape end.
Clean this off to. It looks like a transparent post positioned along the tape path. Reset the counter to zero and fast forward tape to end. Rewind, and try to play tape as normal

Audio Players &... | Answered on Apr 20, 2019 | 919 views


Hi, there
Since your unit has a CD player, the problem with both the turntable and cassette deck is probably due to the rubber belts that turn both mechanisms losing elasticity or have broken over time (or in the worst case scenario, turned to goo). I don't know your model manufacturer, but turntables often have a clip, or some sort of apparatus, that you can remove to lift the turntable platter up and off. If you can do that, you will be able to see what shape the turntable belt is in. For the cassette deck, more intricate disassembly is required. Replacement belts for both can often be found on eBay or other online sources.I found a video for an ion turntable that might have a similar belt system.

Audio Players &... | Answered on Apr 19, 2019 | 32 views


Hello Billy, obviously your STR-K502P, has problems in the main power supply, control you have to remove the cover and look for a fuse indicated as; F901 FUSE (6.3Amp / 125V) and fix it is burned, if so, before replacing it, you would have to get a lamp holder and an incandescent lamp of 200 watts, the old lamps that bring filament, and connect the cables of the holder lamp to the ends of the fuse holder, the lamp replaces the fuse (serial lamp), you connect the STR-K502P to the power network and turn it on, if the lamp turns on completely and stays that way, it is very likely that there are components damaged and are generating a short circuit, in this case I suggest you look for a specialized technical service
If, on the other hand, the lamp is turned on and off or the intensity of the initial flash is reduced, this would give a guideline that there is possibly no short circuit, you can test the operation of the STR-K502P in this situation, if you can hear it, then replace it the fuse, its value is 6.3 Ampere / 125Volts
Once this is done, do not use the STR-K502P, without first checking all the cables and connections of the speakers, corroborating that you do not have any short circuit in them
I hope you can solve it
Greetings Franco Dosil

Hola Billy, evidentemente tu STR-K502P, tiene problemas en la fuente de alimentaci?n principal,controla tienes que sacar la tapa y buscar un fusible indicado como; F901 FUSE de (6.3Amp/125V) y f?jate se esta quemado, de ser as?, antes de reemplazarlo, tendr?as que conseguir un porta lamparas y una lampara incandescente de 200 watts, las viejas lamparas que traen filamento, y conectar los cables del porta lampara a los extremos del porta fusible, la lampara reemplaza al fusible (lampara serie), conectas el STR-K502P a la red de energ?a y lo enciendes, si la lampara se prende por completo y se queda as?, es muy probable que haya componentes da?ados y est?n generando un cortocircuito, en este caso te sugiero que busques un servicio t?cnico especializado
Si por el contrario, la lampara se prende y se apaga o baja la intensidad del encendido inicial, esto dar?a pauta que posiblemente no hay corto circuito, puedes probar en esta situaci?n el funcionamiento del STR-K502P, si logras que puedas escucharlo, entonces reemplaza el fusible, su valor es 6,3 Amper/ 125Volts
Hecho esto, no utilices el STR-K502P, sin antes controlar todos los cables y conexiones de los parlantes, corroborando que no tengas alg?n cortocircuito en ellos
Espero que lo puedas resolver
Saludos Franco Dosil

Audio Players &... | Answered on Apr 19, 2019 | 23 views


Lorraine McKellar wants answers to this question
Hi Lorraine, I sent you the link so you can get the DVB-T202 user manual
Greetings Franco Dosil

Hola Lorraine, te envio el link para que puedas obtener el manual de usuario del DVB-T202
Saludos Franco Dosil
https://data2.manualslib.com/pdf3/79/7820/781968-august/dvbt202.pdf?25f00993f17422491b49e230e03de502&take=binary

Audio Players &... | Answered on Apr 19, 2019 | 60 views


For what?

Audio Players &... | Answered on Apr 18, 2019 | 19 views


You have to complete the id3 tags of songs. Just follow below steps to do that. If you want to edit ID3 tags with iTunes, the following steps will guide you on how to complete this task in details.
1. Run iTunes and find the song which you would like to edit its information by click on it. Or you can choose multiple songs at the same for editing.
2. When the songs that you would like to edit have been selected, you can refer to the steps as below:
I.Enter the "File" menu and choose "Get Info".
II.Choose "Command + I" on the keyboard of Mac or select "Control + I" on the keyboard of computer.
III.Hold down the option "Control" while you are clicking, or just have right click.

3. No matter which method you have chosen, the window of "Get Info" will pop up, where all the metadata of the song will be listed.
You are allowed to edit the information of the selected songs, which is known as ID3 tags.
Something about ID3 tags editing must be known as below:
1. The tab about "Details" which is also called Info in the older version is the place where the info of iTunes song is edited. The information including title, artist, year, album and more can be edited here. You just need to click on the fields which you need to add or edit, then the information will be changed by your words entering.
2. You can find album art of the song in the "Artwork" tabs. You can click on the button "Add Artwork" and choose images from your hard drive to add new art to the song. Also, the built-in tool of album art can be used to add art to the songs or album automatically.
3. The lyrics of the song are listed in the Lyrics tab. Taking down the lyrics automatically is the function in the new version of iTunes. While the lyrics must be copied and pasted to this field in the older versions of iTunes. Additionally, the built-in lyrics can be overridden by clicking on the option "Custom lyrics" to your own lyrics.
4. The song's volume can be controlled in the "Options" tab. Through the automatic equalizer setting, you can determine the beginning time and the ending time of the song. Choose the "Skip" option in the shuffling box so that the song can be prevented to show up in next or in the shuffle playback.
5. In the "Sorting" tab, you can see how the song, the artist and the album are shown in iTunes library after sorting out. For instance, a guest star may be included in the Artist ID3 tag of the song. This would be displayed as a separate part in iTunes. If the artist and the album name are added to the fields of "Sort Artist" and "Sort Album", all songs will be listed together in one album view and you don't need to change the ID3 tags permanently.
6. When choosing the "File" tab, you can see the information including song time, file type and bit rate and more are listed here. This is a new option in iTunes 12.
7. More song information can be added via moving the arrow key which locates on the left bottom of the iTunes 12 window.
8. The Video tab can only be applied to edit the video tags in iTunes library. The episodes from the same season can be put together in this field.
9. When all the editing is completed, you can save them by clicking on "OK" button on the bottom of the iTunes window.


edit-id3-tags-in-the-fields-2-5qo4itlp1ucrbflot1afpynl-2-0.jpg For more methods, check: How to Edit ID3 Tags in iTunes

Audio Players &... | Answered on Apr 18, 2019 | 40 views


Disable random playback.

Audio Players &... | Answered on Apr 17, 2019 | 26 views


You need to have the iTunes App on the computer. Connect both 3 Gen and 6 Gen and register them. Tell iTunes to Restore the 3 Gen to the 6 Gen.

You can also open two panes, one for the 3 Gen and one for the 6 Gen and Select All, Right click, Drag, Copy Here from one pane to another. It is easier via iTunes.

iTunes: How toDownloadPreviouslyPurchased Music, Movies, and Audiobooks
  1. OpeniTunesand select "iTunesStore".
  2. On the right menu, click the "Purchased" link.
  3. If prompted, type your Apple ID and Password, then select "Sign In"
  4. Select the type of item you wish todownloadat the top-right part of the window.
More items...

iTunes: How to Download Previously Purchased Music, Movies, and ...


https://www.technipages.com/itunes-download-previous-purchases

and also
https://smallbusiness.chron.com/download-music-already-purchased-itunes-53285.html

https://www.lifewire.com/redownload-songs-bought-from-itunes-2000488

Audio Players &... | Answered on Apr 15, 2019 | 22 views


I'm thinking maybe safety cut-out for over-heating?
Are you using the specified rating for the speakers?
6 or 8 Ohm?
Are all the speakers working well when it starts? Other than that, it may be an internal component that is overheating and causing the problem - might be worth letting someone with some electronics know-how have a look inside https://usa.denon.com/us/product/HomeTheater/receivers/AVR4806

Audio Players &... | Answered on Apr 15, 2019 | 20 views


If this is an older unit, it looks like the internal battery (assuming there is one) has dropped below minimum voltage - this would render the unit unable to hold the time (and probably any data that had been downloaded?)
It could be a really simple fix.
Here's an example:
https://www.youtube.com/watch?v=1UFoWText44

Audio Players &... | Answered on Apr 15, 2019 | 17 views

Not finding what you are looking for?
Sony Ericsson K810i Unlocked, Cyber Shot Cell Phone Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76054 Answers

Harrie

Level 3 Expert

6705 Answers

Don A
Don A

Level 3 Expert

2360 Answers

Are you a Sony Ericsson Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...