It seems like there might be an issue with the disc recognition or loading mechanism of your Pioneer PD-F805 CD player. Here are a few steps you can try to troubleshoot and potentially resolve the problem:
1. Power cycle: Turn off the CD player, unplug it from the power source, wait for a few minutes, and then plug it back in. This simple reset may help resolve any temporary issues.
2. Check the CDs: Ensure that the CDs you are using are in good condition, free from scratches, and not warped. Sometimes, damaged or irregularly shaped CDs can cause reading errors or problems with the loading mechanism.
3. Clean the player: Use a CD lens cleaner to clean the laser lens of the CD player. Dust or debris on the lens can interfere with the proper reading of CDs and cause incorrect disc recognition.
4. Reset the player: Some CD players have a reset button or a reset procedure mentioned in the user manual. Check the manual for your Pioneer PD-F805 to see if there is a specific reset process you can follow.
5. Check the loading mechanism: Open the CD player and visually inspect the loading mechanism for any loose parts, debris, or obstructions that may be causing the incorrect disc recognition. Gently clean the mechanism if necessary.
6. Lubrication: If you're comfortable with electronics and have experience with repairing devices, you can try lubricating the moving parts of the loading mechanism with a suitable lubricant. Be cautious and use only a small amount of lubricant designed for electronics.
7. Seek professional repair: If the above steps do not resolve the issue, it might be best to consult a professional technician or contact Pioneer's customer support for further assistance. They will have the expertise and specific knowledge to diagnose and repair the problem accurately.
Remember to exercise caution when opening or attempting to repair any electronic device, and if you're not confident in your skills, it's always best to seek professional help to avoid causing further damage.
This might help
ManualsLibhttps://www.manualslib.com > ... > AVS58
View and Download Cocoon AVS58 user manual online. ... 6.6.1 This is an example of a typical setup connecting the AVS58 Receiver to the receiving TV via RCA ...
Question edited for clarity.Question moved to Clock Radios.Disabling the Alarm•? Press the AL1 or AL2 buttons repeatedly until the indicator is no longer lit.ONN Digital Clock Radio User Guide - Manuals+ - manuals.plusManuals+https://manuals.plus > onn > digital-clock-radio-manualJul 16, 2021 - ONN Digital Clock Radio User Guide ; 2 Information and Safety Instructions. 2.1 Important Safety Instructions. 2.2 ; 5 Clock & Sleep Timer. 5.1 ...
Question edited for clarity. It is a Durabrand HT-3196 not duba.
It is not worth repairing. They are $200 new or $60 used. The only thing you can do is a power reset. Disconnect from mains power overnight. In the morning press and hold the power button as you reconnect, continue to hold for 12 seconds.
https://www.google.com/search?q=durabrand+3916+on+standby+mode
..
There could be several reasons why your subwoofer has stopped working on your Norcent 1950 audio system. Here are a few potential causes:
Power issue: Check if the subwoofer is receiving power. Ensure that it is properly plugged into a working power outlet and that any power switches or buttons on the subwoofer are turned on.
Connectivity issue: Verify that the subwoofer is properly connected to the audio system. Ensure that the cables are securely plugged into the correct audio outputs on the Norcent 1950 receiver or amplifier.
Settings and controls: Check the audio settings on your Norcent 1950 system to ensure that the subwoofer output is enabled and properly adjusted. It's possible that the subwoofer level may have been inadvertently lowered or muted.
Defective subwoofer: If none of the above solutions resolve the issue, it's possible that the subwoofer itself may be defective. In this case, you may need to contact Norcent customer support or bring the subwoofer to a professional technician for further diagnosis and repair.
I read this for clearing a code, but you can use it to reset the computer.
The code must be locked in to the memory. This issue can either be caused my the alignment or the light function encoder. You'll need to clear this code if it was just a one time glitch. This has to be done in the Service Program Mode. I can't seem to locate the program manual for this model to issue the reset procedure. Normally the Jukebox will have it in it. If it does not, remove the computer control unit and remote the battery for 5 minutes and reinstall it. This will also reset the machine but it will need to be reprogrammed.
https://www.google.com/search?q=performer+grand+2000+plays+same+CD
..