Top 20 Lexmark X7170 All-In-One Scan/Copy/Fax and Photo Printer Questions & Answers

Details please: you've posted your question in a general thread, not in comments.

Vista XP and Windows 2000 are the only operating systems that the printer manufacturer has drivers for.

The drivers can be downloaded at the following link:

http://support.lexmark.com/index?page=driverSupport&locale=en&userlocale=EN_IE
Simply input the make and model

You may download the Lexmark driver from http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LEXMARK_X7170&page=product&frompage=null#1

i have cannon 3530 xerox machine ... it shows error code 350 ?? any solution ??

The Lexmark x7170 should let you continue printing with the ink cartridge regardless of the estimated ink with most cartridges. The only exception to this is if the cartridges are part of Lexmark's returns programme. I would advise removing the cartridge and checking for small text stating "Return Programme Cartridge" on the label. If this is present sadly there is no way of continuing, apart from buying a new cartridge.With regards to the low ink estimate, am I right in assuming you are using a refilled or remanufactured ink cartridge? If so this is unavoidable but should not prevent you from printing until the ink physically runs out.

Start by clicking here.

Try Lexmark's website.Get onlineand got to www.google.com In the google search box type: "LexmarkSupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.

Try to re-seat the cartridges in the printer. Open the printer cover > remove the cartridges > close the printer cover > re-brick you printer by pulling out the power supply - black box behind the printer where the power cord is plugged in, and re-plug after 10 seconds. When the printer turns on, reinsert the cartridges and close the cover. Try to print a document again to verify that the problem is fixed.

If that doesn't help, the problem could be due to a clogged print cartridge nozzle. Please follow the steps below to fix print quality issues with your model:

1. On your computer, go to Start menu.
2. Go to Programs.
3. Go to Lexmark 2600 Series folder.
4. Select Lexmark Solution Center.

From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through to clean the print cartridge nozzles.

Does this problem happen when scanning either from the scanner glass or the automatic document feeder? Does this problem happen when scanning either from the computer using the Lexmark software or scanning using the Scan button on the printer operator panel? This will help me understand what might be causing this problem.

The 2200 error code indicates that the scanner has stalled. That's why you're not able to make a copy. Please refer to this article on the Lexmark website to fix the problem:2200 Error on the Lexmark X7100 Series All-In-OneShould the error continue to display, please don't hesitate to contact Lexmark Technical Support Center for additional assistance.

The Lexmark Productivity Suite can be downloaded from the Lexmark website at http://bit.ly/fWPweq. Select you operating system > click FILTER > click the driver under Recommended Downloads > download and execute the file. Simply follow the instructions to complete the installation.
For scanning documents, you will also need to install the Lexmark OCR Scan software on your computer. This is used for scanning documents to PDF files and/or saving multiple pages into one file. The software is only available on the installation disc that came with your computer. If you lost the disc, please contact Lexmark Technical Support for assistance.
I hope this information has been helpful.

Please refer the Lexmark X7170 User's Guide for more detailed instructions on how to insert/replace ink cartridges in your printer. Go to Maintaining your All-In-One for the step-by-step instructions.I hope this helps.

The problem could be due to a communication failure between one of the printheads (cartridges) and the All-In One (AIO) or by a short in one if the printheads. Please follow the steps below to identify and fix cartridge issues:

1. Make sure the printer is on.
2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-In-One is busy. Note: If the carrier does not automatically move to the center, turn off the printer or unplug the printer from the power source and then carefully slide the carrier to the center.
3. Remove both cartridges from the carrier.
4. Close the printer cover.
5. Re-brick your printer by pulling out the power supply - black box behind the printer where the power cord is plugged in to, and re-plug after 30 seconds.
6. When the printer turns on, reinsert one cartridge first. Close the printer cover and check for any errors.
7. If no error appears, reinsert the other cartridge. Close the printer cover.
8. Replace whichever cartridge is causing the error to appear with a new genuine Lexmark cartridge. Try to print a document again to verify that the problem is fixed.

Try to re-seat the cartridges in the printer. Open the printer cover > remove the cartridges > close the printer cover > re-brick you printer by pulling out the power supply - black box behind the printer where the power cord is plugged in, and re-plug after 10 seconds. When the printer turns on, reinsert the cartridges and close the cover. Try to print a document again to verify that the problem is fixed.

If that doesn't help, the problem could be due to a clogged print cartridge nozzle. Please follow the steps below to fix print quality issues with your model:

1. On your computer, go to Start menu.
2. Go to Programs.
3. Go to Lexmark 2600 Series folder.
4. Select Lexmark Solution Center.

From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through to clean the print cartridge nozzles.

Please refer to this article on how to How to Restart or Reset the Print Spooler in Windows.I hope this helps.

The Lexmark X7170 printer does not support wireless printing. It doesn't have a wireless network adapter to connect to your wireless network.If you want, you may contact Lexmark Technical Support Center for other printer options. You might find one that will suit your printing needs.

There are Lexmark printer models available in the market that are WiFi compatible. Please visit the Lexmark website for more information about Lexmark's wireless printers. You might find one that will suit your printing needs.The Lexmark X7170 printer does not support wireless printing. It doesn't have a wireless network adapter to connect to your wireless network.

Try this approach:1. Remove the power adapter from the printer. The power adapter is the black box where the power cord is plugged in at the back of the printer.2. Disconnect the power cord from the power source.3. Reconnect the power cord directly to the power outlet in the wall. Bypass any surge devices or power outlets.4. Re-plug the power adapter into the printer.5. If the printer won't automatically power on, press the power button on the printer operator panel.I hope this helps.Should the problem continue, please contact Lexmark Technical Support Center for additional assistance.