Top 20
Sony DVP-SR200P DVD/CD Player Questions & Answers
How do i program my sony dvd player dvp.sr200p to work on my philips tv
No special programming is required. Connect the DVD player to the TV using an HDMI cable. Note which input jack you used on the TV (example: HDMI 1 or HDMI 2, etc.) Turn on the DVD player and insert a DVD disc and play it. Turn on the TV and select the input you used to connect the DVD player (example: HDMI 1 or HDMI 2, etc.). You should now see and hear the DVD disc playing. Most settings are pre-set at the factory so everything will work without adjustment. However, both the DVD player and the TV have a Menu where you can adjust settings for picture, sound, etc. if desired.
How do i fix my sony mhc-gnz888d reject and stand by problem?
The "Eject" and "Standby" display issue on your Sony MHC-GNZ888D could be caused by a variety of factors, ranging from simple glitches to more complex hardware problems. Here are some troubleshooting steps you can try to address the issue:
- Check Power Source and Cables:
- Ensure that the power source and power cables are properly connected and providing a stable power supply to the system.
- Try plugging the Hi-Fi into a different power outlet to rule out any issues with the electrical supply.
- Reset the System:
- Unplug the Hi-Fi from the power source and wait for a few minutes.
- Plug it back in and try turning it on again. This can sometimes reset any minor glitches in the system.
- Remove and Reinsert Discs and Tapes:
- If you have any discs or tapes in the player, remove them and make sure there is nothing obstructing the mechanisms.
- Disconnect External Devices:
- Disconnect any external devices (USB drives, smartphones, etc.) that are connected to the Hi-Fi and try turning it on again.
- Check for Jammed Mechanisms:
- Open the disc tray (if applicable) and visually inspect for any obstructions or jams. Gently remove any foreign objects if you find any.
- Cassette Deck Maintenance:
- If you're not hearing the usual clicking sounds from the cassette deck, there might be an issue with the mechanisms.
- Try opening the cassette compartment and visually inspect the mechanisms for any obstructions or damage. Ensure that the cassette deck is clean and free of debris.
- Cooling and Ventilation:
- Make sure the Hi-Fi has proper ventilation and is not overheating. If it gets too hot, it might automatically go into standby mode.
- Seek Professional Repair:
- If none of the above steps resolve the issue, it's possible that there might be a more serious hardware problem.
- In such cases, it's recommended to contact Sony customer support or a professional audio equipment technician for further diagnosis and repair.
Remember that working with electronic equipment carries inherent risks, and if you're not comfortable or experienced with troubleshooting and repairs, it's best to seek professional assistance to avoid potential damage to the equipment or harm to yourself.
7/30/2023 3:23:51 AM •
Sony Audio...
•
143 views • 0 helpful votes
I have a sony S-master CMT-SPZ50 and everytime i turn it on and my music starts playing it goes straight to standby and has been doing this for weeks now. how do i fix this?
If your Sony S-Master CMT-SPZ50 audio system keeps going into standby mode shortly after turning it on, there are a few troubleshooting steps you can try to resolve the issue:
- Power cycle the system: Turn off the audio system and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset any temporary glitches or issues.
- Check the speaker connections: Ensure that all the speaker wires are properly connected to the audio system and the speakers themselves. Make sure there are no loose or frayed wires that could be causing a short circuit or interruption.
- Disconnect external devices: If you have any external devices connected to the audio system, such as smartphones or MP3 players, try disconnecting them to see if the issue persists. Sometimes, an incompatible or malfunctioning external device can cause the system to go into standby mode.
- Reset the system: Look for a reset button or option on the audio system. It could involve pressing a specific combination of buttons or using a small reset pinhole. Refer to the user manual for instructions on how to perform a system reset.
- Check for overheating: If the audio system is located in a confined space or if the vents are blocked, it could lead to overheating and cause the system to go into standby mode. Ensure that the system has adequate ventilation and is not exposed to excessive heat.
Not finding what you are looking for?