Mackie TH-12A Thump - Powered Loudspeakers with Tripods, Bag, and Cables - Answered Questions & Fixed issues

0helpful
1answer

Ive got a 1801 mackie sub. Humming/ buzzing with no other sounds. Signal light is bright, doesn't flicker like the overheads. Thanks in advance.

Why does my subwoofer make a humming noise? The voltage difference between a subwoofer electrical ground and the equipment ground can cause it to hum. This can happen because of the irregular current flow in your audio cable. Turning on the volume too high can also cause a hum.
5/15/2021 8:39:49 AM • Mackie Audio... • Answered on May 15, 2021 • 218 views
0helpful
1answer

I have a Berhinger B115 that works fine for about 20 minutes or longer at about 1/2 power and then shuts off. Wait 10-15 minutes and it will turn back on. I had this issue with an active Mackie speaker years back and it was a protective relay that was failing. Any chance that someone would have a schematic and a place to order parts?

Hello Redman, I sent you the link to download the service manual of model B112, it is quite similar Check for possible false contacts I hope you can solve the problem Greetings Franco Dosil Hola Redman, te envio el link para que descargues el service manual del modelo B112, es bastante similar Revisa posibles falsos contactos Espero puedas resolver el problema Saludos Franco Dosil https://elektrotanya.com/behringer_eurolive_b112d_sm.pdf/download.html http://www.uns.nu/pdf/Behringer_Speaker_B115D.pdf
7/5/2019 4:55:42 PM • Mackie Audio... • Answered on Jul 05, 2019 • 44 views
0helpful
1answer

My Mackie Tapco speaker makes a awful loud buzzing sound when powered on. Why

Sounds like an earthing problem , check your cables and make sure none of the cables have strands that could be shorting down to earth causing the buzz
1/13/2019 5:52:48 PM • Mackie Audio... • Answered on Jan 13, 2019 • 443 views
0helpful
2answers

Mackie srm450 amplifier low sound

are you running a sub, daisy chained to it? are they connected to each, just have one, two, four? are you hooked up like in the pic? 26425296-rpqltah4fv1m3mnct1w42zea-3-0.png
1/4/2017 8:16:15 AM • Mackie Audio... • Answered on Jan 04, 2017 • 240 views
0helpful
1answer

How to connect subwoofer power speaker to mackie mixer 1604

http://www.billebro.se/proddoc/PRID_5420_doc_swa1501_om.pdf
11/9/2016 10:49:55 PM • Mackie Audio... • Answered on Nov 09, 2016 • 727 views
0helpful
1answer

Mackie subwoofer srm1801 is chirping, what could

Hi. Did you get diagnosis for this? Mine has developed the same fault...
8/28/2016 8:29:30 AM • Mackie Audio... • Answered on Aug 28, 2016 • 227 views
0helpful
1answer

Mackie fr series m-1400 pro amp not working, no power, fuse not blown

output finals are shot,and get the caps checked also.
2/2/2015 6:53:06 PM • Mackie Audio... • Answered on Feb 02, 2015 • 149 views
0helpful
1answer

Do you have a mackie 1530z schematic?

Mackie will send schematics free-o-charge.
6/4/2014 9:05:52 PM • Mackie Audio... • Answered on Jun 04, 2014 • 138 views
0helpful
1answer

Is there a 1530z schematic?

Mackie will send schematics free-o-charge BUT surface mounted electronic components are no cakewalk to repair. If's it's a fuse, cool but if not it may be best sending it to the pro's for repair.
6/4/2014 9:04:50 PM • Mackie Audio... • Answered on Jun 04, 2014 • 135 views
0helpful
1answer

Mackie 450 , crackling even

I think the fault is in the power amp section, since it's not affected by the volume control. If this is a stereo amp and it's accross both channels then it must be a part that is connected to both. Such as a Power Amp IC. However if mono probably a transistor on the heat sink.
7/4/2011 3:15:36 PM • Mackie Audio... • Answered on Jul 04, 2011 • 153 views
0helpful
1answer

I have an old 80s

Need to know if turning down the master volume when it is making the noise stops the noise. If it does, the fault is in the preamp section, if not, it is in the power amp/power supply. Suspects are the power supply electrolytic capacitors.
2/28/2011 11:46:26 PM • Mackie Audio... • Answered on Feb 28, 2011 • 114 views
0helpful
1answer

Dear repair team, I have a

It wont be fixed by friday It appears a number of components have failed in the amp If it's not the main transformer , you're looking at $200-300 for a fix
12/7/2010 1:38:10 PM • Mackie Audio... • Answered on Dec 07, 2010 • 337 views
0helpful
1answer

Power supply pulsing all dc line are not stable

Can you please update this with the model number? You indicate that the caps look OK, do you mean physically or have you tested them? how they look deos not indicate whether or not they are defective. Please supply the model and I should be able to provide more details.

Thanks,
Dan
8/19/2009 12:52:26 PM • Mackie Audio... • Answered on Aug 19, 2009 • 72 views
0helpful
1answer

Vocalizer 3 output checked cables and swapped out. 1300 watt power adaptor lights up. sound indicator light is on but no sound. tried mono and stereo. power adaptor problem?

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.
4/24/2024 7:18:55 AM • Audio Players &... • Answered 23 hours ago • 17 views
0helpful
1answer

How do I change to degree mode on my porpo YH-2000

  1. Power Off: Turn off the device.
  2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
  3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
  4. Power Off Again: Turn off the device once more.
  5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
  6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.
If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.
4/20/2024 8:57:52 PM • Audio Players &... • Answered on Apr 20, 2024 • 18 views
0helpful
1answer

Panasonic SA-PM250 CD stereo system. Tune dab radio sa pm250?

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..
4/20/2024 5:59:04 PM • Audio Players &... • Answered on Apr 20, 2024 • 20 views
0helpful
1answer

Setting time on fmdott085 V398

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..
4/17/2024 4:54:26 PM • Audio Players &... • Answered on Apr 17, 2024 • 16 views
0helpful
1answer

Openfit Shokz battery replacement?

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..
4/16/2024 4:58:24 PM • Audio Players &... • Answered on Apr 16, 2024 • 19 views
Not finding what you are looking for?
Mackie TH-12A Thump - Powered Loudspeakers with Tripods, Bag, and Cables Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Mackie Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39388 Answers

Are you a Mackie Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...