20 Most Recent
Panasonic Advanced Hybrid Kx-t7730 White 12 Button Spea - Page 4 Questions & Answers
I have a Panasonic phone..when I press the flash/call waiting button I get the second call but when I press it again to get the first call I lose the call
It sounds like you are experiencing a problem with your call waiting feature. When you press the call waiting button, you are able to switch between the two calls. If you press the call waiting button again to return to the original caller and the call is disconnected, there could be a problem with the call waiting feature on your phone.
There are a few things you can try to fix this problem:
- Check with your phone service provider to see if there are any known issues with the call waiting feature on your phone.
- Make sure that call waiting is turned on for your phone. This is usually done through the phone's settings menu.
- Try restarting your phone. This can sometimes resolve any issues with the phone's software.
- If the problem persists, you may need to have the phone inspected by a technician to determine the cause of the issue.
Panasonic kx-ts880mx display not working
Hi,
please power cycle the phone unit and check for the display screen when it's on the base again. If still having the issue, please attempt a factory reset of the device. Then, you can setup the phone just as you did when it was brand new. Otherwise, you might have to keep the receiver off of the display in order to allow the screen to show data as it used to.
Thank you.
Panasonic cordless phone always engaged
Hi,
please power cycle the phone to start. If the issue continues, then you can move the phone to another phone outlet. If the problem remains, then you can next factory reset the phone in order to overcome the issue.
Thank you.
My Panasonic base phone does not display anything
Hi,
Please leave a test message to your phone and check the display again. If still blank, please power cycle your phone and or headset before checking the screen again. Otherwise, I would re-read the steps for setting up voicemail on your phone and attempt them again.
Thank you.
How to check phone line on panasonic cordless phone
Unplug all the phones from the mains wall sockets, phone jacks, and remove all the batteries from the handsets.
If you have one, plug in an 'old style' corded phone into the main incoming line box. That is normally the one closest to the door.
If you don't have one, plug in the base unit into that master socket by the front door and the mains and put the battery in the handset. If it has a line, plug in the others, if it doesn't contact your telco.
Panasonic KX-TG1855AL envelope and speech bubble symbol
Hi, you probably won't get this anymore, but here is the fix (I had the same problem and couldn't get rid of it. Had no messages or calls that I hadn't viewed). You will laugh but press the Clear / Mute button for a few seconds. That is the bottom right button out of the four that are around the big round one. It has a C on it, a line under the C and the mute symbol underneath... Good Luck. Julia
My Panasonic home telephone keeps beeping?
usually this means the connection is not 100% or it can not charge or the battery is low ? How old is the unit ? and the regularity of the beeps and if they come from the base or the handset can give a clue try this method:
1. On the handset select Menu, Answer Phone is displayed, press Select
.
2. Press CALLS until Settings is displayed, press Select.
3. Press to highlight Ans. & record and press Select.
4. Press to display Message alert and then press
or to select On or Off and select Save.
Saved will be displayed and the annoying machine has now been de-beeped
If you have messages that you have not listened to this can cause beeping . You should try to give the model number and more details that way the answer will be more relevent .
I'm not using a land line with my Panasonic KX-TGD560 and only have my cell connected to it via Bluetooth. How do I clear the "Check Tel Line" message since I'm not using a "Tel Line"?
Check Tel Line means that the phone is not getting a dial tone. Unless you connect the KX-TGD560 base to a RJ-11 phone cord going to a RJ-11 jack with a working telephone service, this message will continue.
I've never used the cell phone link without having a land line connection. The Link-to-cell option for using the handset on Cell 1 (or Cell 2) may still work. You need to have a compatible cell phone close to the base. The phone needs to be positioned where it gets good signal strength. Test this yourself.
I hope this helps.
Cindy Wells
(Panasonic has the manuals and a trouble-shooting guide for the KX-TGD560 here: http://eng-ca.faq.panasonic.com/app/answers/detail/a_id/55826/~/product-guide---telephone---cordless---model-kx-tgd560%2C-kx-tgd562%2C-kx-tgd563%2C . )
Not finding what you are looking for?