Belkin USB/Serial Portable Adapter (F5U409-CU) Serial Adapter - Answered Questions & Fixed issues
F5u409 will not connect to toledo scale. When
Hello,
What version of windows are you running on the machine it doesn't work on? This adapter does not work with windows vista 64bit or windows 7 64bit. It only works with 32 bit operating systems such as windows 98, xp vista 32 or windows 7 32. If you need one that works with 64bit you can buy the Belkin F5U257.
If you have a 32bit OS try uninstalling the software and reinstall with updated drivers from here:
http://en-us-support.belkin.com/app/answers/detail/a_id/308/~/f5u109%2Ff5u409-usb-pda-adapter---drivers
Now plug the device in and try to communicate again with your serial device. Most devices only recognize com1 or 2 so make sure the usb device is set to emulate either of those ports.
Chris
8/26/2011 8:43:59 PM •
Belkin...
•
Answered
on Aug 26, 2011
•
110 views
Blekin USB/Serial adapter, MacBook Pro, and Garmin etrex GPS
According to a tech support person at Belkin, this device is compatible with OS8x and OS9x, so it is not going to work with OS10 unless new drivers are released.
The drivers available so far are listed here:
http://www.belkin.com/support/download.asp?lang=1&download=F5U409&mode=
8/25/2009 12:41:34 PM •
Belkin...
•
Answered
on Aug 25, 2009
•
1,150 views
The computer does not recognise the adapter
You need to isolate the problem. You may need to connect the USB-Serial adapter into different USB port of your computer or you may want to try connecting it into different computer. If you get the same problem after using different computer, you may need a driver for it. Or it could be defective.
Have a great day!
7/9/2009 9:14:27 PM •
Belkin...
•
Answered
on Jul 09, 2009
•
603 views
Tried using usb to seriel adaptor but unable to
make sure that both the cable and the software that you are using are set to same Com ports.
Ex. the cable set to Com4, the software must be set to Com 4
To change the Com ports of the cable you just got to Device Manager under System Properties then on the properties of the serial cable there is an option to change the Com port settings.
To change the Com port setting of the software just simply go to its settings or preferences.
7/2/2009 12:58:07 AM •
Belkin...
•
Answered
on Jul 02, 2009
•
344 views
Belkin USB/adaptor
Google Franson GPS GATE this little software utility is what you need
3/9/2008 3:59:10 PM •
Belkin...
•
Answered
on Mar 09, 2008
•
431 views
Mtv music generator detecting directx 7
ok... so I've now installed this on my new pc that i built... first in order to get it to install at all you must download DirectX 7.0 and right click to "--(edit compatibility settings to windows 98/Me and run as administrator)--" remember this as well be doing it a few times. once you do that install DirectX 7.0 and say yes to all. now that this is installed take the .iso file you have and burn it to a cd or DVD-r, once burned you need to go to my computer and right click on the cd/DVD drive, select open (NOT open autoplay), inside the disc menu i want you to go to 2 files... "setup" and "start" need to also have their compatibility settings changed to the above settings. now that these are set stay in the cd menu and double click "setup" this will take you through the setup procedure. after the setup procedure is finished do not view the notes, and continue back to the desktop. now from your start menu load the game and it should run
How do I Reset my Belkin wifi Extender?
Using the reset button
The location of your range extender's reset button will vary depending on its model. The reset begins once you
press and hold thereset button for
at least 10 seconds while the range extender is powered
ON. The
Status Light on the the range extender will momentarily flash and will then begin to blink. When the light becomes solid again, the reset is complete.
Using the web-based setup page
If using the physical button does not work, you can access the range extender's web-based setup page and do the reset from there.
Before you begin:
- Make sure that the wireless computer or device you're using to access the web-based setup page is connected to the same network as the range extender.
- You need to identify the IP address that your router has assigned to your range extender. Locate this by accessing your router's DHCP Client table. Once you have the range extender's assigned IP address, use it to access your range extender's web-based setup page.
- Alternatively, you can enter "http://192.168.206.1" in the web browser's Address bar if your range extender has NOT detected a DHCP server in your network.
Step 1:
In the web-based setup page of the range extender, go to
Utilities and select
Restore Factory Defaults.
QUICK TIP: You may be prompted to log in with your range extender's administrator password. If you have not set any, simply leave the field blank and click on
Submit.
Step 2:
Click on the
Restore Factory Defaults button.
Your Belkin range extender should now be restored to its factory default settings.
Drivermax
Routers are very important for setting up an internet connection. As we all know, the Internet is the most important network, which connects us to the world. There are various companies exist in the market, which offers routers. But Belkin is the top market-leading company for routers. Advance features, technology is the attributes of the Belkin router. For a new router user, installation is a big challenge, and in case the user doesn't.have installation CD then it becomes more difficult. So in this blog, we are going to discuss
How to Setup Belkin Router Without CD. Now, you do not need to worry about the installation process, There are 2-3 ways to set up Belkin Router Without a CD.Now one question comes to your mind, How? So Tech Support Experts are here to answer all your queries. Our team is experts in technology and here we will elaborate on the steps to Setup Belkin Router Without CD.
Not finding what you are looking for?