Belkin F5D7130 And F5D7010 (Bundle) 802.11g/b (f5d7130/f5d7010) - Page 9 - Answered Questions & Fixed issues

There should be a small hole in the back (might be in front though I doubt it) and should be labeled "reset". Take a small object like the point of a ballpoint pen and push it in to the hole and hold until the lights go out and then release. After that it should be reset to factory settings.

What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that yopu have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here for step by step instructions on how to connect to the wireless network and troubleshooting steps

The best way to limit it is to put a password on it

I would suggest that it's probably your computer that is getting slower. Try checking your machine for viruses/malware. I suggest using CCleaner and Defraggler from Piriform.com (both free for personal use). I would also suggest using Microsoft's Windows Defender Offline, to make sure it's clear of anything (use a "clean" machine to create the software). On the router side, check to see if there are any firmware updates. Also, determine if your router supports 802.11n...if not, consider upgrading.

Internet device means go to their website on your computer. Create an account and once in the account, you will input a set of numbers and letters to link your Roku device to your Roku account using a computer. Roku device will display the numbers and letters until it is linked to an account. I’m happy to assist further over the phone at https://www.6ya.com/expert/kevin_c38b47f462e94458

only if Belkin has a firmware up date allowing win7 operation

Hello Anonymous This router has several interfaces each with a maximum speed, so you should specify which one you mean. For example, the wireless interface can reach up to 300 Megabits per second (Mbps) at most. The RJ45 can connect at 10 or 100 Mbps But what most influences the speed of a conection to the internet is the one you have contracted with your ISP. I hope my explanation will be helpful.

Open router page Access restriction>>Create a policy by name eg. block facebook chose deny>>enter url(website address) Add it Make sure to enable it. http://ui.linksys.com/files/WRT150N/1.01.2/Filters.htm Internet Access Policy

1. open a browser like internet explorer, firefox, chrome, etc. 2. in the address bar ( thats where you put in http://, www, or just read website addresses), type in http://192.168.2.1 3. you should be at the dashboard then where you can do a wide array of tasks to setup your belkin router or troubleshoot if you are having any issues with your network.

http://www.ehow.com/how_8511043_authenticate-router.html How to Authenticate My Router eHow

Press the security button on unit, it should send the password to the laptop.

Got to the router manufacturers site and follow instructions for changing password. It is done once you access the router's software through your internet browser.

This is on their site

www.belkin.com/support

If it is default. Then the admin password on Belkins is "blank" i.e. they have not admin password initially.

Make sure your router is set not to reply to ICMP echo requests. http://en.wikipedia.org/wiki/Smurf_attack

Do a hard reset,usually there is a button on the back of the router.With power plugged in,press and hold reset button 15 sec. then without releasing button remove power plug and hold an additional 15 sec.,then plug power cord back in and hold an additional 15 sec. After that release the reset button and it should reset to default.You may need to do this a few times but it should solve your issue.

Try it on another laptop or a computer to determine if the problem is with the Belkin USB hub or the laptop USB jack.

LOST WIFI SECURITY KEY WORD If you have lost your WEP/WAP wifi key phrase there is no way to recover it except go into the router administration settings and see if it is in plain text there. If not then you will have to make up a new key phase and apply it to ALL your connected devices. In future, write the key phrase down on a piece of tape and apply it to the bottom of your router. You can use a hint instead of the actual phrase. I use the memo function of my cell phone to keep all my passwords and keys.

Did you check if the keyboard is compatible with MAC OS? If yes, check the drives.