Belkin F5D7130 And F5D7010 (Bundle) 802.11g/b (f5d7130/f5d7010) - Page 5 - Answered Questions & Fixed issues

1. Try resetting the router. You will have to set it back up after. 2. Update any firmware - go to Belkin's site, or there may be an option in the router's control page/application to check for and apply any updates. 3. The router itself may just be going bad and need replacing. It happens after a while.

Press and hold the reset button for about 8 seconds. It'll revert to the factory default settings. Check the documentation to see the default password.

Hi, when you connect a USB hub, operating system (i.e. Windows, Mac, etc ) it should install automatically a generic driver for it, only when you connect a device to USB hub, in example, a camera, you have to install drivers for that specific device according to its installation guide.

Sounds like a driver, if you connect you computer with an Ethernet cable to your router temporarily, it may automatically find the software from the internet. If you would like some help, I could always connect to your computer remotely, and install it for you. Just provide me with an email address to contact you on so that I can help you out. Andy

Hi, Why not contact your room mate and get the password from him? In the meantime, if you are looking for access to the Internet for free, most Council Libraries offer internet access at no charge to card holders.

Any router that you cannot remember the password to your only choice is to reset the router to factory default and reconfigure it. To reset a Belkin router: Press and hold the Reset button for 15 seconds. The router automatically reboots when it resets. Wait approximately one minute until the router restarts, and then navigate to "192.168.2.1" using any Web browser. Leave the Password field blank and click "Submit" to connect to the Web-based interface

http://community.belkin.com/t5/Wireless/how-do-I-change-my-password-on-my-belkin-N600-db-model-f9k1102v3/td-p/6997 I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Check the manual. It should have a default wifi password, assuming that's what you're trying to do. You may also need to check the bottom of the router.

Try resetting power to both your router AND your modem. One at a time, starting with your modem, disconnect power for 30 seconds and then reapply power. Your next step, if that was unsuccessful is to call your internet provider. The service may be down on their end or if not, they can reset your connection as well. If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_3e83613ef5f2a68b

You would need to log onto the router (open your browser and enter the URL 192.168.1.1 (most routers use this one) or 192.168.0.1 (if that don't work)). When the router login comes up, enter your userid and password, go to wireless setup, and find the guest SSID section. Here you will find the option to add a guest password.

Diane; use dry compressed air to blow dust, etc out of grilles and opening, wipe off with damp clothe and wait 24 hours before plugging in, unless absolute no moisture present in router. press the helpful button compressed air in a can, can be bought at a lot of stores, even Walmart Please enter the Postal Code where products will be delivered

Try looking here Download Free Manuals

You could try looking here. If you don't find it, search google for "Belkin F9K1110V1 router user manual" and click on the first result. Download Free Manuals

you need to log into router and enable printers Mac address to the list of allowable devices , router should be accessible directly using a web browser (explorer?) on any device on network already just enter router Ip address number into top destination line , (example of proper formatt is 192.168.100.001) this should bring you to log in page , enter password (yours) into avail spot and press enter , if successful then it will open to a new page that has all the items down left side of page , select dhcp tab and go to list of devices , click ip number of printer(its assigned allready) , select refresh on top tab your new printers ip number /model number/mac address should be there , select exit now your devices on network can "see" it you will need to enable/install this printer on those devices in order to use it , it does not have to be a defalt device on any item on network

Well, there is no default password, if that's what you're aiming for. You have to find admin and ask him for the password. Source: Download Free Manuals

Forgot my belkin router password - CCM

ccm.net > Forum > Internet

Jun 10, 2015 - I have been trying to set up intranet through a Belkin router and my tv keeps asking me for the password for my router. I don't remember it at all I ... Wifi router password reset [Solved] - CCM Oct 20, 2015 Forgot my password for my router??? [Solved] - CCM.net Nov 20, 2012 Forgot password to netgear router. - CCM.net Jun 23, 2011 Belkin admin password [Solved] - CCM Sep 10, 2010 More results from ccm.net

Belkin Router Password Lost!! - Forum Thread - PC Advisor

www.pcadvisor.co.uk > Forums > Tech Helproom

That's going to be a problem a really big problem in fact, Contact your ISP and tell them that you have forgot your password and ask them if they can reconfigure the router for you. The reconfiguration is an easy process if you know it very well, it differs from router model and your ISP's you need a couple of info which only your ISP knows so its better to call them.

You can connect the F5D5131 switch into any of the ports on your router except the WAN port. The WAN port is often a different color, and labeled "WAN" or "Internet" or "DSL"; the rest of the ports (LAN ports) are often just labeled 1-5.

I think you have the upper light blinking and lower light solid. Is that right? The upper light blinking means that the connection to your ISP is not working. Try unplugging/replugging the Ethernet cable in the top port (probably yellow and labeled "WAN" or "DSL" or something). Check the other end of that cable. If you have another Ethernet cable, try swapping it out. If none of that works, call your ISP to check the connection.

DisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdjiDisixmxksmdmxkdmsnakcndoamdji