Questions & Answers
Cant access belkin router w 18.104.22.168 or any
. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. .Click on wireless and enabled it. Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.
1,173 views | 0 helpful votes
Connect belkin f5d7130 to homehub 1.5
You need to connect all pc's and homehub to a switch so they can talk to one another. Then use the AP as a wireless access point to connect all wireless laptops, and connect the AP to the switch with ethernet cable, and you have a network. Just make sure that only your HH or AP supplies IP addresses or they will clash.
489 views | 0 helpful votes
Xbox 360 help
All devices on your network should be assigned an IP address. They need it to be identified on the network.
You can try rebooting your router. The wireless on belkin routers can be a bit temperamental. Then try the 360 setup.
If you are still coming up blanks, then check your router's DHCP server setting. Make sure that it is turned on. (It is the function that assigns the IP address.)
My lat suggestion is to manually assign an address to the 360. Try this only if you are familiar with how IP addresses work.
Hope this helps....
149 views | 0 helpful votes
You actually have a couple of issues here. Fix these in this order.
1.) Login to router and turn off wireless (if you're not wanting to use wireless)
2.) Connect the ADSL modem CAT5 port to the WAN port of the Belkin router.
3.) Login to router and turn on NAT and make sure DHCP is enabled.
4.) On your Windows machine turn on DHCP under the network settings.
This should allow your connection to be setup automatically and stop wireless access on the Belkin router.
Let me know if you need more help.
213 views | 0 helpful votes
Not finding what you are looking for?