You may have an issue with the cassette deck on your Sony LBT-D550. The cassette deck uses a belt drive system to operate the cassette mechanism; if belts are broken, it can cause the deck to malfunction.
All the belts may have failed at the same time, but it's also possible that there is another issue causing the problem. Some possible causes of a cassette deck malfunction include:
A problem with the cassette mechanism itself, such as a jammed cassette or worn-out gears.
A problem with the cassette deck's motor, which a malfunctioning capacitor or other components could cause.
A problem with the cassette deck's control board, which a malfunctioning switch or other components could cause.
To determine the cause of the problem, a professional technician should look at the cassette deck.
Si su MiniDisc est? atascado al escribir el TOC, es probable que los datos est?n da?ados o da?ados. Puede intentar reparar los datos da?ados utilizando un programa de recuperaci?n de datos MiniDisc, como MiniDisc Data Rescue. Este software puede reparar MiniDiscs da?ados o da?ados escane?ndolos en busca de problemas y luego solucion?ndolos. Si el problema persiste, es posible que deba reemplazar el MiniDisc por uno nuevo.
It is possible that the Sony ECM-AC2 mic is not compatible with the Samsung Chromebook 3, or that there is an issue with the Koopao splitter you are using. Here are a few things you can try to troubleshoot the issue:
Check the mic's compatibility: Make sure the Sony ECM-AC2 mic is compatible with the Chromebook 3. Some mics may not work with certain devices, even if they are connected through a splitter.
Check the splitter's compatibility: Make sure the Koopao splitter is compatible with the Chromebook 3. Some splitters may not work with certain devices, causing issues like the one you are experiencing.
Check the audio settings: Make sure the audio settings on your Chromebook are properly configured to use an external mic. You may need to adjust the input level or select the correct input device in the audio settings.
Check the mic's connection: Make sure the mic is properly connected to the splitter. Check the mic's cable for any visible damage or loose connections, and make sure the mic is plugged in securely.
Check for any other visible issues: Inspect the mic, splitter, and Chromebook for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the devices, or damage to the devices or their components.
If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the devices inspected and diagnosed by a professional. They will be able to identify the cause of the problem and determine the necessary repairs.
The problem with equalizers is they can mess with things like Dolby signals on AV units. The best way yo avoid this is to connect tape decks or CD players to the EQ and then connect the EQ to the tape in socket of the AV unit.
Replace the batteries in the remote with fresh ones. Take your smartphone and use the front facing selfie camera to to see if you see a flashing red light when you press a button on the remote with the front of the remote facing the phone. If you can the red light, the remote is working.
Hi David, do you want to connect the ST-D505 tuner to the TA-D505 amplifier?
You just have to connect an audio cable of two RCA (red and white) from the audio output L and R of the tuner ST-D505 to the input of Tuner in the amplifier TA-D505
Remember to connect the FM antennas and the AM Antenna Loop on the ST-D505 tuner
To listen to it, you have to select Tuner on the TA-D505 and enjoy the favorite radio stations
I hope you have my comments
Greetings Franco Dosil
Hola David, quieres conectar el sintonizador ST-D505 al amplificador TA-D505?
Simplemente tienes que conectar un cable de audio de dos RCA(rojo y blanco) desde la salida de audio L y R del sintonizador ST-D505 a la entrada de Tuner en el amplificador TA-D505
Recuerda conectar las antenas de FM y la Loop Antena de AM en el sintonizador ST-D505
Para poder escucharlo, tienes que seleccionar Tuner en el TA-D505 y disfrutaras de las estaciones de radio preferidas
Espero que te sirvan mis comentarios
Saludos Franco Dosil
https://elektrotanya.com/sony_lbt-d505_d505cd_d505cdm_d505m.pdf/download.html
The speakers have quit working or the wires that connect to the speakers are faulty or there is a source component that is malfunctioning on your stereo that needs to be repaired or replaced.
There's so much information missing from this question, but assuming this is a DVD changer, it's a disc error. Either the disc is upside-down or backwards and can't be read, is too dirty/scratched or unsupported and can't be read, or the entire mechanism is jammed or malfunctioning. If there are discs in the tray and you can remove them all, remove them and see if the error goes away. If the tray will not open, either take the cover off and remove the discs, or bring it to a service center.
I think I have this unit. Did you turn the balance control firmly in both directions fully left to right? If you could get behind it, you could spray it with electrical switch cleaner. If you changed speakers over and you checked the wiring connection on the unit and and on the speaker, then it will be an amplifier stage issue, perhaps a failing capacitor. You can look for that. If not, Sony Service Centre.
https://www.manualslib.com/manual/242635/Sony-Str-D590.html?page=8#manual
..
Have your device being fully plugged into an outlet that works and turn off and take off any serge protectors and if it is still not working your device might be broken and needs to be repaired or replaced.
Get a CD cleaning disc from Walmart or Amazon. There are two laser optics, tracking and read/write/ It sounds like both of yours are dusty with either causing the issue. The tiny brushes on the disc clean the lasers.
Humming is normally bad shielding or grounding within the plug. Sony are also a strange company and do things _their_ way. Also cable come in different qualities and with good audio equipment buy the best with gold flashed contacts, copper stranded cable and good screening.
Hi,
Please double check that you're using multiple cables from your blu ray and not just one. A coax cable can connect your bluray player to your amp and then another cable from hdmi output can connect to your projector.
If you need more help in figuring out exact cable types and detailed home-theatre setup guide, you can reach out to dolby as well by calling 415-558-0200. They do home theatre setup as well.
Thank you.