20 Most Recent Panasonic Technics Sl-1210 Mk2 Turntable black Sl1200 Proaudiostar - Page 7 Questions & Answers

Is there a AV output on the TV ? Usually either a pair of RCA;s (white/red) or a 3.5mm headphone jack. Try that

Per Panasonic Check the speaker connections carefully. If that does not solve the problem probably a power supply malfunction, so contact the Dealer

http://www.fixya.com/support/t8274003-panasonic_sa_ak600_f61_shows

Some people suggest cleaning the fans of the TV, as dust and dirt get inside them and clog them up. If that doesn't work you probably have a power supply problem.

Unless it's a programmable remote it won't have any settings to adjust. Obvious thing first - you have changed the batteries? If it is a programmable remote, then you might not have got the right code for the system. This will allow some buttons to work and not others. One the other hand you can reset to factory settings on your system. This might correct the remote problem.

Check and replace damaged component/s at its main power supply regulator section circuit. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

II just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!"Visit site: http://S­­­­­­a­­­­l­­­­a­­­­r­­­­y­­­­­­H­­­­D­­.­­C­­o­­M

Check and replace the damaged component/s at its audio output stage circuit. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Circuit diagrams of many popular brand TVs and other devices are given.

Have you tried connecting it with an Optical cable?

Is that what you are finding?

F61 means that the power amp has something wrong with it. It could mean the IC501 has failed or that there is something wrong to the power supply to it. The good news is the service manual is free online. You can get it by simply putting the model number into google and searching for the PDF of it.

Look on the control box in the phone room for a jack labeled MOH. Attach a compatible receiver to the terminals and set the volume by calling the multi phone and putting you on hold, then adjust the volume on the receiver to a pleasant level.

Original available: Video Direct Panasonic N2QAYB000009 Replacement Remote Control for...

It seems to be asking you to set the region code to 2 for Europe. If you are in the UK and don't have any other region code disc for other areas, then you should look in the manual about the region code set up. Or search online for the setting of the region code.

http://www.fixya.com/support/t1667292-play_ipod_panasonic_sa_en27_out_remote

I realize this question was asked a long time ago, but I'll post a photo now anyway in case someone else has this same question. The drive in this machine and also in the RX-FT560 has two belts. The long one makes the capstans go around, and the short one makes the take up reals move. In the photo, you can see the short belt, and I have drawn a not too straight line where the long one goes. It goes under the big wheels that drive the capstan spindles and around the motor pulley. I hope this helps someone.

This is often a switch that won't engage or a belt that has come off.