Top 20 Nokia 6630 Handheld Questions & Answers

well u can try *#7370# but this will ask u for lock code. try the default lock code 12345. if this doesn't work try this: switch off ur phone. Press green button, * , 3 and power button press and hold all these buttons until u see formatting screen.

I have zero, menu, delete and edit buttons don't work. What shall I do ?

You need to use master code to unlock your phone on www.unlocker.com

1. Switch off your Nokia phone2. Now Press following key sequence *#7370# or *#7780#3. Enter Default lock code is 12345.4. While holding these buttons, press the power button and switch on the phone.5. Wait for message 'Format it

you can format your mobile by (phonix) program 100% ........muhamad

menu>tools>settings>phone>general>phone language

HiPUK code is called as PERSONNAL UNBLOCKING KEY.Your phone will ask for PUK code when you entered the PIN code wrongly several times depending upon the mobile make. The mobile asks for PUK code so that unauthorized persons do not use your mobile for wrong cause.To get PUK code please contact your service provider through phone or go directly to their office. They will provide you the PUK code for your mobile. The PUK code for mobile phone.so that you can open your phone. When you planning to call your service provider you cannot use your mobile as it is fully locked. Please use some other mobile with same network to call your service provider.While you get the PUK code ,the service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only. If they are satisfied with your answers they will provide with the PUK codeDONOT enter the PUK code several times wrongly,It will block your sim card permanently.This PUK code is FREE. You no need to pay any sum to get the PUK codeThank You.

with yo 4n off press the buttons [*], [3] and the green(calling button) at the same time them switch on yo 4n while still holding the buttons (note that u'll lose any data on the 4n) please notify me when it works on facebook just search for Eng Kasule Ronald

open netqin antivirus them on its home screen press options and select uninstall and continue by following instructions if it works notify me on facebook "Eng Kasule Ronald"

hi to get the master reset code visit unlock-free here they ask the mobile model and the imei number of your mobile .finally they generate the codes to reset your mobile at free of cost.

just format it by following my simple instructions.
with yo 4n off press the buttons [*],
[3] and the green(calling button) at
the same time them switch on yo 4n
while still holding the buttons (note
that u'll lose any data on the 4n)
please notify me when it works on facebook just search for Eng Kasule
Ronald

with yo 4n off press the buttons [*],
[3] and the green(calling button) at
the same time them switch on yo 4n
while still holding the buttons (note
that u'll lose any data on the 4n)
please notify me when it works on facebook just search for Eng Kasule
Ronald

Try to flash ur phone using usb cable... for assistance contact me on +919742320078

The SMS Message Center Number is a phone number that acts as a gateway for transferring SMS messages between cellular devices. The number should be automatically set by the carrier.

To know where are these numbers stored, here is the way to locate it: Launch the SMS application. Access the Menu Launcher. From the Options pulldown menu, select Preferences. The SMS Message Center and SMS E-mail Center number should appear. If you do not see any numbers, it means your mobile service provider does not allow you to change these numbers.
Usually, you don't have to touch these numbers. If you suspect they are incorrect, contact your mobile service provider and ask them to send an Over The Air (OTA) message with the correct information in it.
Each carriers has different SMS Message Number.
Here are some of the provider's SMS Message Number : AT&T: +19078319301 Cingular: +12099042010 (West Coast) +17045020600 (East Coast) T-Mobile: +12063130004 Rogers Wireless (Canada): +17057969300 Fido (Microcell - Canada): +15149931123

rub the sim card with neat polyster cloth..insert the sim and check weather it is properly placed. .if it say again "INVALAID SIM". Try another sim,if the another sim works then der is a fault in u sim.

Hi,

When a PIN code is entered wrongly three times, the phone line will be blocked. Irrespective of the owner, it is assumed that you are not the owner of the phone line when you enter your pin wrongly.

The blocked line at this point can still be unblocked and this is where the PUK code comes in. Once you enter the PUK code, your PIN code will be reset. You can then create a ne PIN code.

To get your PUK code, if your phone is using a SIM Card, Check the SIM card Pack and you will see your PUK code there. But if you don't have a SIM card pack, you can get the PUK code from your service provider.

Call the customer care line of your service provider using another phone, request for your PUK code and it will be given to you. Note that your service provider will ask you some few questions about your line in order to be sure you are the real owner.

Note that your service provider alone is the only one that can give you your PUK code because it's only your service provider that has it.


Regards.

very easy go to seetings phone language setting and chose the language that you want and press select

congratulation

U have to reset the phone. try the reset code *#7370# . If it still not working then give it to nokia service provider to reboot it.

Uninstall the jukebox you have. Install this one:http://gaptex.mylivepage.com/file/469/1656_lcg_jukebox_v2.11_s60v2_cracked_binpda.sisEnter 00000 key to register.Hope this will help you.If you like the solution please rate it.