20 Most Recent Panasonic VIERA TC-P55ST50 55 in. 3D Plasma HDTV - Page 6 Questions & Answers

check sams photofacts

Fault with main board. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

This tv was intended to be used in New Zealand. It is rated 50/60 Hertz. Just google the user manual and you can see that the retailer told you a fib. Regards, Joe Van Buren

This is usually known as the ss board on your tv. This board carries lethal voltages in excess of 400Volts. You should unplug your tv from the outlet and allow the capacitors to discharge completely before attempting to replace this board. More often than not this code represents this faulty board. However, it can also be the logic board which is known as the D board. This is a very simple process and you can do this on your own and save lots of money. The cheapest route is buying boards on ebay. Make sure that you purchase from somebody with outstanding feedback. Regards, Joe Van Buren

Have you checked to see if you accidently turned the speakers off on the menu? Regards, Joe

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Disassemble procedure to many popular brand TVs are given with illustrations. You can get details from it.

Check and replace its tuner; if it does not accept any on-air program. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Just try a reset to this TV. To do a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so.This procedure will make it a hard reset.If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option.If you wish to get some details; check the site linked here.Pull up older posts.Surf the site with patience.http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given.Never forget to exit the service mode, after all adjustments have been done.

Contact any service technician. There are may checks to be done before confirmation. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Do the power LED at the front panel light up, when you switch ON the set. If yes, the main board & sustain boards need to be checked. If NO; the main power regulator board should be replaced. In both the cases, it will be better to contact the authorized service center; especially to Plasma Displays. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Main board fault. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

Press the 'Mute' button on the remote control once.