20 Most Recent FreeMotion I7.7 Incline Trainer Treadmill - Page 6 Questions & Answers

0helpful
1answer

Kettler UNIX PX Elliptical Cross Trainer. The rod to wheel is loose. How to tighten?

Question edited for clarity full 'make model (what it is)'. Here is the manual with assembly instructions and the simple tools needed, 2 screwdrivers and a M8 spanner. https://www.manualslib.com/manual/766855/Kettler-Unix-Px.html#manual ..
2/3/2024 6:46:25 PM • Exercise &... • Answered on Feb 03, 2024
0helpful
1answer

The electronic display is not working even though I've changed batteries. How can this part be repaired?

go to the professional repairer instead of repairing yourself.
2/3/2024 6:43:39 PM • Exercise &... • Answered on Feb 03, 2024
0helpful
6answers

Treadmill incline stuck @ steepest level (highest)

MAKE SURE YOU STAND TO THE SIDE OF THE TREADMILL WHILE PERFORMING THIS
1)Connect the wall power to the treadmill
2)Remove the safety key
3)Hold down the red stop button and red increase speed button (this is the red triangle next to the start button)
4)Insert the safety key while holding both buttons down in step3
5)The treadmill will now go into a diagnotstic calibration mode
6)Let go of both buttons in step 3 and press the oval stop button once
7) Now press the up arrow green incline button once(This is located to the left of the yellow program button)
8) Allow the treadmill to go through a calibration cycle, once it completes and stops moving remove the safety key count to 3 and reinsert.
1/31/2024 6:54:00 AM • Exercise &... • Answered on Jan 31, 2024
0helpful
1answer

My confidence treadmill is saying safe on the screen and will not do anything

Make sure the safety key is making good contact. Remove it and reinsert it then try to start again. Another thing is to make sure the treadmill is level.
1/29/2024 9:58:00 AM • Exercise &... • Answered on Jan 29, 2024
0helpful
1answer

Matrix 7Xi Treadmill. It has power loss 5 minutes into a walk?

Question edited for clarity. Question moved from Matrix Televisions category. It sounds like two things. 1. and overheating issues. Make sure fans are working and that vents are free of dust. 2. A motor controller fault 3. the belt is too tight and causing strain which in turn causes overheating of the motor. yes I know it's three things. Service Manual (did you know it is for commercial use?)

T7xI-01 TreadmIll Service manual

Johnson Health Tech https://content.johnsonfit.com > service_guide PDF Workouts 20 minutes and longer will have a cool down length of 5 minutes. ... Each facility has two options for the network setup on their Matrix Fitness 7xi ... 137 pages More, plus Matrix Support https://www.google.com/search?q=Matrix+7Xi+Treadmill.+It+has+power+loss+5+minutes+into+a+walk& ..
1/28/2024 8:36:16 PM • Exercise &... • Answered on Jan 28, 2024
0helpful
1answer

How to fix E03 for a Superfit treadmill

I think I had something similar happen. It may be that your motor drive is overheated. If you smell burning from the motor stop immediately. You might just need to make sure this is properly lubricated.
1/26/2024 8:15:23 PM • Exercise &... • Answered on Jan 26, 2024
0helpful
1answer

LIME RECUMBENT BIKE. Looking for manuals for it please?

Question edited for clarity. Question moved from Garden. They make a number of exercise bikes and a range of road bikes. There are two make sites in the link. https://www.google.com/search?q=LIME+RECUMBENT+BIKE Not much in published manuals, but the search query could be refined by having a model number. It isn't a mainstream make in North America. https://www.google.com/search?q=%22LIME%22+RECUMBENT+BIKE+manual ....
1/26/2024 12:06:34 AM • Exercise &... • Answered on Jan 26, 2024
0helpful
1answer

Hi can someone please tell me what power supply I need for Health stream MB303 recumbent bike as it has been misplaced

the Healthstream MB303 recumbent bike requires a power supply with an input voltage of 90-132VAC, 50-60Hz and an output voltage of 9VDC, 1.5A. You can purchase a replacement power adapter with these specifications from Schwinn's official website for $18.99 Replacement Power Adapter with 6-foot Cord ' Schwinn (schwinnfitness.com)
1/24/2024 2:41:55 AM • Exercise &... • Answered on Jan 24, 2024
0helpful
2answers

Got an error code of 5103 07. AFG 3.1AT

Hi, if this is a treadmill, please power cycle the treadmill to start. If the errors are not in the product documentation, please attempt to confirm them by calling the manufacturer first. it might be an issue like too much friction under the belt that can be cleared up by leaving the platform and applying oil to the section under the belt. or you could possibly need to schedule a repair. But making the call will help point us in the right direction. Thank you.
1/20/2024 4:32:05 PM • Exercise &... • Answered on Jan 20, 2024
0helpful
1answer

I have a Pro Form 995i treadmill that I just bought recently and when I hit the iFit button it says “Not connected please check users manual”. Is there any way I can reset it?

Question edited for clarity. iFit is a subscription service, you have not connected to WiFi, haven't subscribed, haven't paid, so you don't get the service. You can't 'reset it'. IFIT DISCLAIMER: iFit requires an internet connection and Wi-Fi to function. You will be required to provide your credit card information upon sign-up for iFit. Your Commitment Period may be month-to-month or twelve (12), eighteen (18), or thirty-six (36) months, depending on your agreement. Terms shall apply to your iFit use and subscription during your Commitment Period and any subsequent Renewal Term. Unless you cancel your account or notify us at least twenty four (24) hours prior to the expiration of your commitment period that you do not wish to renew your subscription, your iFit subscription will automatically renew for an additional month, one (1) year, or two (2) year period, as applicable, for the same duration as your initial commitment period ("The Renewal Term"), and you authorize us to bill the then-applicable membership fee and any taxes to the payment method we have on record for you. It is all here https://www.proform.com/blog/faq-power-995i-treadmill/ ..
1/13/2024 8:28:42 PM • Exercise &... • Answered on Jan 13, 2024
0helpful
2answers

My Lexco LGT-9925 treadmill has come up error CAb and won't work. Google is showing absolutely nothing so I'm not sure how to fix it? Please help me.

Question edited for clarity. Question moved from Computers category. Unfortunately, it is an unknown make in North America because it is made in Korea. Your local fitness equipment retailer will look at it and use generic testing procedures. Try the maker direct https://www.google.com/search?q=lexco+treadmill+service+manual https://www.google.com/search?q=Lexco+LGT-9925+cab+error ..
1/9/2024 5:21:13 AM • Exercise &... • Answered on Jan 09, 2024
0helpful
1answer

Voicezone talking pedometer user manual

Thank you for reaching out regarding the Voicezone Talking Pedometer user manual. We understand the importance of having clear instructions for using our product, and we appreciate your interest in obtaining the manual.Regrettably, at the moment, we do not have the Voicezone Talking Pedometer user manual readily available. However, we are actively working on creating comprehensive documentation to assist our users in navigating the features and functionalities of the pedometer In the meantime, if you have any specific questions or if there's anything particular you'd like assistance with regarding the Voicezone Talking Pedometer, please feel free to let us know. We're here to help and ensure you have a positive experience with our product https://apkoyo.com/We apologize for any inconvenience and appreciate your patience as we work on providing the necessary information.Best regards,
1/4/2024 6:13:26 PM • Exercise &... • Answered on Jan 04, 2024
0helpful
2answers

Error 9 displayed on the incline of my american Fitness treadmill

What's the Model Number? Checked their site and there are 11 units.
1/4/2024 2:44:25 PM • Exercise &... • Answered on Jan 04, 2024
0helpful
2answers

Need workout sheet for weider pro 4300

Hello. Contact Weider directly and tell them what you need. go to this link for the contact info, phone numbers, email etc.
https://www.iconservice.com/CustomerService/contactUs.do

please rate this answer as very helpful. thanks. J.
1/3/2024 7:34:17 PM • Exercise &... • Answered on Jan 03, 2024
0helpful
1answer
Not finding what you are looking for?
FreeMotion I7.7 Incline Trainer Treadmill Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top FreeMotion Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

920 Answers

john h

Level 3 Expert

29492 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

Are you a FreeMotion Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FreeMotion Exercise & Fitness

  • FreeMotion Exercise & Fitness

Most Popular Question

incline not working

  • Exercise & Fitness
Loading...