Nordic Track NordicTrack C2150 Treadmill - Answered Questions & Fixed issues

I believe your talking about the Controller, not a computer board. This device may turn on, however; the instructions and sequence of activity will not work. Many reasons for this to happen; and usually the problem is traced back to a power surge. Major components and equipment need to be plugged into a UPS (Uninhabitable Power Supply) with special protection to avoid damage to vital electronics. If plugged into the wall (directly) there are no protection devices and current can pass through a device and damage the controll unit.

Nordic Track... | Answered on Mar 25, 2014 | 105 views

get a new battery

Nordic Track... | Answered on Nov 13, 2013 | 1,116 views

see the video and proceed according at your common sense and logically: GOD BLESS YOU

Nordic Track... | Answered on Jul 26, 2012 | 255 views


The servo motor which changes the resistance (under the plastic covers) is winding the cable in the wrong direction. Release tension on the cable by pulling the magnets away from the fly wheel and flip the cable off the the servo motor pulley, this will allow the cable to be pulled in the correct direction.

Nordic Track... | Answered on May 19, 2019 | 71 views

Controller . I aman authourised repairer for the brand in Australia .

Nordic Track... | Answered on Apr 28, 2019 | 69 views

Try spraying silicone spray under the belt. It worked on mine. You can buy spray cans from a Hardware or Bunnings etc.

Nordic Track... | Answered on Apr 07, 2019 | 71 views

It would appear via one video and someone else's post that it is at the front of the machine, directly above the crossbar that contacts the floor.

Nordic Track... | Answered on Mar 04, 2019 | 72 views

My treadmill has a little steel rod that flips in and holds the bed up' When you want the bed down you pull the rod back out and it lets it come back down.

Nordic Track... | Answered on Feb 17, 2019 | 84 views

Have you ever found the answer to this problem?

Nordic Track... | Answered on Feb 05, 2019 | 292 views

Sounds like the overlay on the console has stopped working. If you get beeps on all buttons but not the ones in question, this will need replacing. It’s quite an easy job once you have the parts. Try eBay or the shop you got it from.

Nordic Track... | Answered on Feb 02, 2019 | 50 views

check to see if there is a smaller board in the unit. There maybe relays between the main board and the motor.

Nordic Track... | Answered on Jan 02, 2019 | 109 views

GO to Nordic track website and look under support. It should direct you to what error codes mean.

Nordic Track... | Answered on Jan 02, 2019 | 104 views

Proform Treadmill Incline Problem Fixed How to reset re calibrate your treadmill
Please see this video for to help you to fix it in incline and calibration incline motor
cell+whatsApp: +50588611441

Nordic Track... | Answered on Jan 29, 2018 | 348 views

not worth repairing.

Nordic Track... | Answered on Jan 11, 2018 | 245 views

the belt has two rollers the front one has a motor roller adjustment screw like the one on a car alternator; tighten this screw untill the rolller grips the belt.

Nordic Track... | Answered on Jan 11, 2018 | 66 views

Hello, PJ1989 -

I suggest you contact NordicTrack Customer Service directly and explain your problem:

You may need Nordic Track authorized repair service.

Nordic Track... | Answered on Jan 09, 2018 | 535 views

Not finding what you are looking for?
Nordic Track NordicTrack C2150 Treadmill Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides