the belt has two rollers the front one has a motor roller adjustment screw like the one on a car alternator; tighten this screw untill the rolller grips the belt.
Please download the User manualf or Nordic track iFit Coach Plus
and see in the user manual, how to do it.
Blessing
[email protected]
cell+whatsAPP:+50588611441
You must observe 3 things:
Open the cover from motor
1) See if the Drive belt or belt for motor is Loose?
if does, adjust the 2 bolts for tension belt motor the deflection will be 1/8"
2) or Too tight loose the 2 bolts , and loose little until you have deflection for 1/8" and tight the bolts again, keeping the deflection for 1/8"
3) See if the belt is Cut!! replace it, by new one.
Blessing
[email protected]
whatsapp:+50588611441
Time to replace the Console board CPU, the Clock+power supply inside had been failed.
Treadmill Doctor
Blessing.
[email protected]
cell+whatsAPP:+50588611441
The treadmill is set for kilometers, not miles.
With the stop button pressed, insert the safety key/magnet. This will display miles (or Kms) and hours of use.
There will also be a "M" for metric or "E" for english, or miles. Use the speed up/down buttons to adjust to "E".
The circuit board is fried. It's too expensive to have fixed if the warranty is expired. You can try and find a used display from ebay or craigslist. It would be an easy swap.
Your lower control board has a shorted part, these boards are repaired by Jatinah Electronics which can be found with a google search. This problem will require a new or repaired control board. Good Luck!
You have to lubricate the Running belt and Deck.
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
The motor controller board is faulty.
If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/