Top 20 Nordic Track NordicTrack C2150 Treadmill Questions & Answers

I believe your talking about the Controller, not a computer board. This device may turn on, however; the instructions and sequence of activity will not work. Many reasons for this to happen; and usually the problem is traced back to a power surge. Major components and equipment need to be plugged into a UPS (Uninhabitable Power Supply) with special protection to avoid damage to vital electronics. If plugged into the wall (directly) there are no protection devices and current can pass through a device and damage the controll unit.

get a new battery

see the video and proceed according at your common sense and logically: GOD BLESS YOU

https://www.livestrong.com/article/410922-the-controls-are-not-working-on-a-nordictrack-treadmill/

Question edited for clarity and correct name of maker. Question moved from Tablets to maker category. Contact Nordic Track with a view to returning it under warranty, or out of warranty repair. https://www.google.com/search?q=Nordic+Track ..

English only on Fixya. We are a North American website. https://www.google.com/search?q=Nordictrak+C2300%2C+buttons+not+working https://translate.google.ca/ ..

ODD AS IT MIGHT BE WE LEARN TO TAKE PICTURES BEFORE REMOVING THINGS .

See this video:- https://www.youtube.com/watch?v=Bu_SEUU2umo

Please note that these instructions don't apply to all models of treadmills. Many recent models, including all models with touchscreen consoles, do not have the capability for the user to calibrate the speed. Speed calibration is a process that is used to correct imbalances in the machine's operating speed. Please note that this procedure involves pushing the machine to its maximum speed very quickly. Do NOT stand on the treadmill while performing this procedure. First, you need to enter calibration mode on the console. To do this, press and hold the STOP and SPEED INCREASE buttons (this will be either an up arrow or a + (plus) symbol). While holding these buttons, insert the safety key onto the console. This will cause the machine to go into calibration mode. After this has occurred, you may let go of the buttons and the safety key. Next, press the stop button once. This will enter advance the screen to the next feature of calibration mode. As said previously, do not stand on the treadmill while performing this procedure. Press and hold the speed increase button. Watch the console. You will see a number on the display that will increase as you hold the speed increase button. Continue to hold the speed increase button until the number changes to "85." This will take the treadmill to its maximum speed, which will also be displayed on the console. Please note that the example below only demonstrates the console displaying "85", not the treadmill's operating speed.

we can not guess at what might be wrong if you don't tell us what it isn't doing the way it is supposed to .

If the electrical outlets work and are fine unplug the treadmill and then check the power cord for any damage. Replace the power cord if it's damaged. If the power cord is fine and looks fine then check the circuit breaker switch on the treadmill and reset the circuit breaker switch if it's tripped.

The belt could be worn out or has broke and will need to be replaced.

ASK NORDIC WE ARE NOT THEIR SERVICE TECHS

It possibly needs a new wheel on the track. If it clacks when you step, this could be the case. Otherwise, maybe the fan could have warped somehow.

perhaps it needs new battery

ever think about asking Nordic track I have never had any need of a machine to walk on .. I go fishing and used to walk over 3 miles daily doing what I love outdoors in the sunshine .even things with a woman .

No weight limit

SORRY BUT THIS IS NOT NORDIC TRACK TECH SUPPORT

the rollers are not aligned. Check the manual for adjustment procedures.

https://www.manualslib.com/manual/583110/Nordictrack-Commerical-2450-Treadmill.html?page=27 Quoting from manual above (may be similar model if not the same.) 7. Turn on or turn off the display demo mode. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation. To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox.