20 Most Recent Life Fitness "9500 Next Generation Treadmill remanufactured" - Page 5 Questions & Answers

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH Unfortunately, the only way to resolve this issue is to replace the clutch and possible the shaft it rides on.

Repair Parts for LifeFitness Steppers Belts Batteries Springs SPORTSMITH... Please have your model and serial number available. We may have the diagram for your stepper. This will show you the location for your battery.

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH You have posted this question in the Stair Climber section, but the error you are listing is a treadmill error code. The following information should help. Probable Cause A) Incline control error. B) Insufficient power source. C) User exceeds weight limit. D) Unit will not lift. E) Unit thinks it is always at 0% incline and only lifts up. F) 3 amp circuit breaker has tripped. G) CPU board has stuck relay. H) Lift motor is faulty. Corrective Action A) Access the incline manual mode in diagnostics by pressing 9, 1, 9, ENTER and then pressing HILL program key. Incline the unit with two people on the unit. B) Ensure treadmill is connected to a dedicated 120V, 20 Amp circuit. C) Advise user of unit's weight limit of 300lbs (137kg). D) Perform the lift test procedure by pressing 9, 1, 9, ENTER and then pressing HILL program key. E) Inspect the home switch for smooth operation and inspect the wiring of the home switch for damage or poor connections. Inspect the lift motor cable connections and for the presence of the suppressor board (should only be 1). F) Test the circuit breakers and replace if necessary. G) Replace the CPU board. H) Replace the lift motor. LifeFitness 9500 Treadmill Lift Control Error

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH Some of these units have 9 volt battery found in the back of the console. Also some of these units that do not have the 9 volt battery, still used the same console shell. If you have an empty spot with no wiring in it, then you are fully relying on your external power supply. I am attaching a link to the picture of the back of the console I am referencing. CASE BATTERY DOOR 0K36 01187 0001 SPORTSMITH net

Error codes listed here: http://www.sportsmith.net/Categories.aspx?ID=29e3caae-4c42-4648-a7df-e346a1912e9b

Eat right and exercise

Next Generation 9100, 9500HR, 9700HR, 9700HR with Decline Treadmills

• Press and hold the "Pause" key while pressing the "Clear" key twice.

Hope this helps! If anything else please visit us online http://www.sportsmith.net/productsearch.aspx?dsNav=N:10598 or give us a call at 888-713-2880

http://www.profitnessmd.com/Manuals/CTG%20Operations%20Manual.pdf