Life Fitness F1 Smart Treadmill - Page 8 - Answered Questions & Fixed issues
What is reset cause 14000000?
Well, you have placed this query under computers and also under exercise without identifying the brand and model of the device. If it is a Windows error, the repair involves a factory reset. If it is something like an error on Nordic Track, ironically that too involves a factory reset --if simply unplugging it for 5 minutes does not erase the error. A Nordic manual should tell you how to reset. I just don't know even what device you are asking about. It is always helpful to add brand and model to a query.
10/27/2023 7:22:17 AM •
Exercise &...
•
Answered
on Oct 27, 2023
•
26 views
Technogym dtv board communication error
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwi1_qeAxpSCAxXwlokEHQAYDwUQFnoECBEQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft29937399-technogym_dtv_board_communication_error&usg=AOvVaw0rObFgYPK4x1VrIytaXB2n&opi=89978449
10/26/2023 8:25:52 PM •
Exercise &...
•
Answered
on Oct 26, 2023
•
53 views
Lube Belt Alarm for CT5.4 Not Removed
If you're seeing the "Lube Belt" alarm on your treadmill and the usual reset methods haven't resolved the issue, it's possible that resetting the mainboard could help. Here's a general procedure to reset the mainboard of a treadmill:
1. Turn off the treadmill: Make sure the treadmill is completely turned off and unplugged from the power source.
2. Locate the reset button: Look for a small reset button on the mainboard of the treadmill. It is usually a small hole that requires a pin or a paperclip to press.
3. Press and hold the reset button: Insert a pin or a paperclip into the reset button hole and press and hold the button for about 10-15 seconds. This will reset the mainboard.
4. Release the reset button: After holding the reset button for the specified time, release it.
5. Plug in and turn on the treadmill: Plug the treadmill back into the power source and turn it on. Check if the "Lube Belt" alarm has been cleared.
If the reset procedure doesn't resolve the issue, it's recommended to refer to the user manual or contact the manufacturer's customer support for specific instructions on how to reset the mainboard of your treadmill model. They may be able to provide further guidance or troubleshoot the issue remotely.
Remember to always prioritize safety and follow the manufacturer's instructions when dealing with any treadmill maintenance or repairs. I hope this helps, and I wish you success in resolving the issue with your treadmill!
10/8/2023 4:55:53 PM •
Exercise &...
•
Answered
on Oct 08, 2023
•
80 views
My yoga teacher told me to buy a Sticky mat. What is that?
A sticky mat is just a type of yoga mat that sticks easily to the floor
so that you get good traction while you do your yoga. It's particularly useful
for Power Yoga as that's a type of yoga that involves a lot of movement.
9/8/2023 12:13:29 PM •
Exercise &...
•
Answered
on Sep 08, 2023
•
436 views
Calibrate incline on Tjojan tr500 treadmill
Method 1: Press Stop and Speed Up, Insert the Key
To calibrate the incline, press and hold the stop and speed increase buttons. While holding the buttons, insert the safety key. The machine will now be in calibration mode. Press the Stop button once. Then, press one of the incline buttons to begin the calibration. It is recommended that you do not stand on the machine while the calibration is taking place.
The machine will move to its highest incline position, then to its lowest decline position. Please wait for the machine to come to a complete stop. When the machine stops moving, the calibration is complete. Remove the safety key from the console to exit calibration mode.
Method 2: Press the Stop Button, Insert the Key
To calibrate the incline, press and hold the stop button. While holding the button, insert the safety key into the console. The machine will now be in calibration mode. Press the stop button once. Then, press either the incline up or incline down button to begin the calibration. It is recommended that you do not stand on the machine while the calibration is taking place.
The machine will move to its highest incline position, then to its lowest decline position. Please wait for the machine to come to a complete stop. When the machine stops moving, the calibration is complete. Remove the safety key from the console to exit calibration mode.
8/24/2023 3:25:54 PM •
Exercise &...
•
Answered
on Aug 24, 2023
•
156 views
Not finding what you are looking for?