Canon PIXMA MX882 Wireless All-in-One Printer - Answered Questions & Fixed issues

Canon printer light blinking error is a common error. Each printer features a flashing light to indicate its functionality. With Canon printers, you have flashing green and orange lights to inform you of any existing problems. It is suggested to carefully observe the number of flashes or the pattern of blinking lights as this will help you to understand the problem. And depending on the pattern, you can follow our canon printer troubleshooting guide mentioned below to solve that issue. What does triangle with lightning bolt mean on Canon printer? The orange triangle with the lightning bolt comes on when the printer is plugged in. The white light above the power button is on, but the printer is otherwise dead. What does the orange triangle mean on my Canon printer? When a printer error occurs, the Alarm lamp flashes orange as shown below. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Power Lamp Flashes Green. What does the triangle symbol mean on my canon printer? Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver. What does the flashing yellow light mean on Canon printer? When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.

It could be that your printer or your router is losing the ip address. You can set a permanent IP address in the machine on the same range as your router. eg 192.168.x.50. This means the router will always find it and you can also set the address in printer port settings on your computer in the control panel.

what type of computer is it connected to ? which os ? https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mx-series/pixma-mx882

Solution 1: This is a purge unit error.
There maybe something jamming the purge unit or just a absorber out of place which is picking up on the carriage preventing it from moving correctly.
Try to move the carriage away from the purge (its where the printhead/carriage parks its self on the right side of the machine) with no resistance then you can shine a torch into the machine and look at the purge unit.
There maybe crumpled paper jammed in the purge.
If all looks well, the purge unit may be defective and had to be replaced.

Solution 2:
The wiper on the purge may have stuck. It slides back and forth and they have been known to stick.
Push it with a long screwdriver to see if it moves.

Solution 3:
Something is blocking the printer inside. It could be a paper jam or a foreign object.
Check using a flashlight, to ensure there is nothing obstructing the paper feed mechanism down inside the printer where it is not easily seen.
If there is nothing obvious, unplug the printer power supply.

if you can print from pdf, excel or other formats but not from word, then unistall microsoft office and reinstall it again

Confirm that the printer is still plugged into a working power outlet try plugging this printer into a known verifiable working power outlet and then try powering it on if it still doesn't power on I hate to say this but it would cost you more to get it repaired then for you to purchase new the current replacement model for the mx882 is the mx922(Amazon @ $99.00)

Its difficult to give you accurate advice without more detailed information like the make and model of the printer

But I this is a laser printer it is common in some that over time and usage the plastic feeder gears become worned out and missed a lined with the gears of the fused unit.. Sometimes just replacing the fused unit can resolve this issue but if it doesn't then the feeder gears need to be replaced but that's not usually an easy DIY task unless you are a highly skilled mechanical inclined person.... This is typically a 3~4hrs replacement project and should be done by a professional if not under a service contract can cost about $200 plus any parts replaced ...at least that's typically how much I charge

Hi try removing/replacing all cartridges again - ONE AT A TIME. If that doesn't work, open the printer again and check which cartridge LED is not on. Replace the 'LED off' cartridge with a new one. good luck

You cannot scan negatives or slides with this all in one printer.You need a film scanner.

This explains why there is no online support for Canon varioPrint machines. The website CopyTechNet is my go-to solution for help. https://www.copytechnet.com/forums/canon/147237-need-help-varioprint-135-service-manual.html https://www.google.com/search?q=Canon+Varioprint+110%2C+code+6527 ..

You mentioned that you have already replaced the Laser Unit, but the error persists. Here are a few more steps you can try: Check the cable: Ensure that the cable connected to the Laser Scanner Unit is properly attached and not damaged. Replace the DC Controller PCB (PCB4): If the error still persists after checking the cable and replacing the Laser Scanner Unit, you might need to replace the DC Controller PCB (PCB4) Here are some YouTubes that may help - once you get past ads. Exciting New Discovery (youtube.com) How to fix error code E110 in Canon ImageRunner Cantina IR 2520 2525 2530 #canon #subscribe (youtube.com)

You can download the Canon printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

If your Canon iPF605 printer won't enter service mode and gets stuck at the "S" symbol without initializing, it may indicate a firmware or hardware issue. Consider updating the firmware or contacting Canon support for further assistance.

They make a few, mains, battery, solar, solar with battery. https://www.google.com/search?q=Canon+Calculator Disconnect power for 30 minutes to reset it. Generic Canon Errors https://www.google.com/search?q=Canon+Calculator+error+message ..

Troubleshoot this issue step by step: Check the Feed Selection Lever: Ensure that the Feed Selection Lever (located on the lower left side of the front of the scanner) is in the correct position (up) for separation. Straighten the edges of the stack of documents to be scanned. Set the document guides so they are wider than the document to be scanned. Place the documents face up into the feed tray, ensuring they touch the document stoppers. Clear Any Jammed Paper: Be careful when removing jammed paper to avoid cuts. Remove any documents that have been left in the eject tray. Close the document eject tray. If the document ejection is stopped partway, perform this operation with the document eject tray extension open. Hold the upper unit as shown in the diagram and open it to the point where you can remove the jammed document. The pickup roller is located in the middle of the upper unit. Do not hold the protrusion on the upper unit when opening it, as it may deform the pickup roller or cause a feeding error. Close the feeder cover. If the jam occurred in the feed section, pull the document out carefully without applying too much force. Be sure to remove any torn parts remaining in the scanner. Close the upper unit slowly, ensuring it clicks into place. Do not force it to close, as this may damage the scanner. After removing the jammed paper, check if the last page was scanned, and then continue scanning. Rapid Recover System: If a paper jam occurs when the "Rapid Recover System" is enabled in the ISIS/TWAIN driver settings, the image of the document is not saved, and scanning stops. You can continue scanning from the document that caused the paper jam after fixing the issue. Additional Considerations: Make sure the pickup rollers retract when the machine is powered on. Check that the stopper plates are in the down position. Verify that the upper unit is completely closed after clearing the jam. Remember to handle the scanner components carefully to avoid damage. If the issue persists, consider seeking professional assistance or contacting Canon support for further guidance

I would use a soft toothbrush and a little Isopropyl Alcohol and then a lint free cloth and then give another gentle brush. There are some other ideas here. Take no notice of the answer by 'Marvin' on Fixya about dropping the head in boiling water, I think he thinks he is dealing with a colour inkjet printer. https://www.google.com/search?q=canon+p23-dh+v+printing+calculator+clean+print+head ..

Contact Canon for dealer servicing. Optics or developer.

imageRUNNER 3300 - Support - Download drivers ...

Canon Middle East https://en.canon-me.com > imagerunner > series > ir3300 Scan from Canon multi-function devices to a mobile device, upload scans to cloud storage services, attach to and send emails, and print. Other Products ... ..

Error P03 on a Canon printer typically indicates a paper jam, even if you cannot physically see any jammed paper. Here are a few steps you can try to resolve the issue:

1. Turn off the printer and unplug it from the power source.
2. Carefully check the paper tray and inside the printer for any jammed paper or debris.
3. Remove any jammed paper or debris you find.
4. Plug the printer back in and turn it on.
5. Attempt to print again.

If you don't see any paper jammed in the printer, there are a few other things you can try to resolve the error P03:

1. Try resetting the printer. To do this, turn off the printer, unplug it from the power source, and wait for a few minutes before plugging it back in and turning it on.
2. Check the ink cartridges and make sure they are properly seated and have enough ink.
3. Clean the printer's rollers. Rollers are the small rubber wheels inside the printer that move the paper through the printer. Over time, dust, debris, or ink can build up on the rollers and cause paper jams. Cleaning the rollers can help resolve the issue.
4. Try to update the firmware of the printer. Sometimes, a firmware update can resolve the issue.
5. Check the printer's settings, ensure that the size of paper loaded match the size of paper set in the settings.

If the problem persists after trying these steps, you may want to contact Canon support for further assistance.

There are some videos that may help but most just say 'replace the toner cartridge'. It is always better to use genuine Canon cartridges for quality and fill level. https://www.google.com/search?q=canon+ir+2202+out+of+toner+message ..