20 Most Recent Canon PIXMA MX882 Wireless All-in-One Printer - Page 6 Questions & Answers

There's a plastic flag that goes through an optical gate and tells the printer that the output tray is full. The flag is stuck, broken or missing, or the optical sensor is dirty. Search for the flag at the level where the paper would be if the tray is full.

• The error code "YE000025-0410" on a Canon 3320 printer typically indicates a problem with the paper feeding mechanism. This can be caused by a variety of issues, such as a paper jam, a misaligned paper tray, or a problem with the paper sensor.

To determine the exact cause of the issue, you may need to perform some troubleshooting steps. Here are a few things you can try:

1. Check for paper jams: Open the printer cover and check for any stuck or crumpled paper inside. Remove any paper that you find and close the cover.
2. Check the paper tray: Make sure the paper tray is properly aligned and that the paper guides are snug against the paper.
3. Clean the paper path: Use a lint-free cloth to clean the paper path of any dust or debris that may be causing the issue.
4. Reset the printer: Turn the printer off, unplug it from the power source, wait a few minutes, and then plug it back in and turn it on.

If these steps do not resolve the issue, there may be a problem with the printer's paper sensor or other internal components. In that case, you may need to contact Canon customer support or a certified repair technician for further assistance.

• Canon LBP5050 printer does not have a cartridge tray. Instead, it uses individual toner cartridges for each color (cyan, magenta, yellow, and black) that are inserted into specific slots inside the printer.

To replace a toner cartridge in the Canon LBP5050, follow these steps:

1. Make sure the printer is turned on and the front cover is open.
2. Locate the toner cartridge that needs to be replaced. Each cartridge is labeled with the corresponding color.
3. Hold the handle of the cartridge and gently pull it out of the printer.
4. Remove the new toner cartridge from its packaging and shake it gently to distribute the toner.
5. Remove the protective cover from the cartridge.
6. Hold the handle of the new cartridge and insert it into the corresponding slot in the printer.
7. Push the cartridge all the way in until it clicks into place.
8. Repeat this process for any additional cartridges that need to be replaced.

Once all of the toner cartridges have been replaced, close the front cover of the printer. The printer should automatically recognize the new cartridges and begin the toner replacement process.

The printer is the Canon MF4350D Super G3 based on E-bay listings. You can find the manual at the Canon support page: https://www.usa.canon.com/support/p/imageclass-mf4350d . There is a PDF Starter Manual, manuals for the drivers (also PDF) and an e-Manual that is in a .zip file. The e-manual is most likely to have the trouble-shooting information you need. I hope this helps. Cindy Wells

try running a Windows Update as you may need to catch up with who knows how many updates from Microsoft just type into search box bottom left corner of Windows desktop screen Windows Update also is the driver the correct 64 bit version for the IR 2520 rather than a 32 bit version.

Error E-000602-0020 on a Canon 2425 machine can indicate a problem with the machine's hard drive. It is possible that the hard drive has become damaged or corrupted, which is causing the machine to be unable to start up properly. There are a few different steps you can try to troubleshoot this issue:

1. Restart the machine: Try turning the machine off and then back on again to see if the error message clears.
2. Check the hard drive: Make sure the hard drive is properly installed and functioning. If the hard drive is damaged or not functioning properly, it can cause the machine to display an error message and not start up properly.
3. Check for any other visible issues: Inspect the machine and its components for any visible issues that may be causing the problem. This can include debris or foreign objects that may have gotten stuck in the machine, or damage to the machine or its components.

If you have tried these troubleshooting steps and the problem persists, it may be necessary to have the machine serviced by a professional. A technician will be able to diagnose the problem and determine the necessary repairs. I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

1) Restart your system by clicking Start, clicking the power icon, and, then pressing Restart. Wait until the start screen of the computer appears. 2) Tap the delete or F2 repeatedly to enter the setup. Wait until the bios loads. The Setup Default option should be displayed. Choose the 'Load Setup Default' option and then click Enter. 3) Save your changes and ensure that the changes are as per your choices.

When both the green and orange buttons are blinking on a Canon iP2700 printer, it usually indicates an error or malfunction. The number of blinks can indicate the specific issue. Here are some steps you can try to troubleshoot the problem:

1. Turn off the printer and unplug it from the power source.
2. Check for any paper jams or obstructions inside the printer. Remove any jammed paper or debris.
3. Check that the ink cartridges are properly installed and seated in their slots. Replace any cartridges that are low or empty.
4. Restart the printer and see if the error message has cleared.

If the issue persists, you may need to reset the printer. Here's how:

1. Press and hold the Resume/Cancel button (the orange button) for 5 seconds, then release it.
2. Press and hold the Power button (the green button) while still holding the Resume/Cancel button.
3. Release the Resume/Cancel button, but keep holding the Power button.
4. Press the Resume/Cancel button twice, then release the Power button.
5. Wait for the printer to reset itself. The green power light will blink and then stop blinking.
6. Press the Resume/Cancel button four times, then press the Power button to confirm the reset.
7. Wait for the printer to finish its reset process and print a test page.

If none of these steps resolve the issue, it may be necessary to contact Canon customer support for further assistance or to have the printer serviced.

No, the Canon LBP 2900B printer is a monochrome laser printer that only prints documents. It does not have the capability to scan or make photocopies. To make a Xerox copy, you would need to use a photocopier or a multifunction printer that has photocopying capabilities.

Error code 171,0,0 on the Canon 5600F scanner indicates a communication error between the scanner and the computer. Here are a few troubleshooting steps you can try:

1. Check the cable connection between the scanner and the computer. Make sure that the USB cable is securely plugged in on both ends and that there are no visible signs of damage.
2. Try a different USB port on the computer. Sometimes, the USB port that the scanner is plugged into can be the issue.
3. Make sure that the scanner driver is installed and up-to-date. You can check for driver updates on the Canon website.
4. Uninstall and reinstall the scanner driver. This can sometimes fix communication issues.
5. Try scanning film with a different scanning software. There may be an issue with the software you are using.

If none of these steps work, it's possible that there may be a hardware issue with the scanner. In this case, you may need to contact Canon support for further assistance.

The steady light from the alarm and power indicators on your Canon MP258 printer could indicate a hardware issue. You mentioned that you already tried resetting the printer, but it did not work. In this case, it may be best to have the printer checked by a professional technician or bring it to a Canon service center for repair. It's possible that there could be a problem with the power supply, logic board, or other components that need to be replaced or repaired.

It sounds like you have already tried a few steps to address the issue. Here are a few more things you can try:

1. Turn off the printer, unplug it from the power source, wait a few minutes, and then plug it back in and turn it on.
2. Check to make sure the printer is not in an error state. If it is, clear the error and try printing again.
3. Try cleaning the print head manually. To do this, remove the print head and use a soft, lint-free cloth to clean it. You can also use a cleaning solution designed specifically for print heads.
4. Check the ink cartridges to make sure they are installed correctly and have enough ink. If they are low or empty, replace them.

If none of these steps work, it may be best to contact Canon support for further assistance. They may be able to provide additional troubleshooting steps or offer a repair service for your printer.

good ^ ^

There could be several reasons why the Canon XA10 camera is not powering on when the power button is pressed. Here are some steps you can take to troubleshoot the issue:

1. Check the battery: Make sure the battery is charged and properly inserted into the camera. If the battery is low or dead, the camera may not turn on.
2. Check the power adapter: If you are using the AC adapter, make sure it is properly plugged into the camera and the power outlet.
3. Try a different battery or power adapter: If you have another battery or power adapter, try using it to see if the camera powers on. If it does, the original battery or adapter may be faulty.
4. Reset the camera: Remove the battery and memory card from the camera, then press and hold the power button for at least 30 seconds. Reinsert the battery and memory card, then try turning on the camera again.
5. Contact Canon customer support: If none of the above steps work, the issue may be with the camera's internal components. Contact Canon customer support for further assistance.

If your Canon ir2016 is experiencing a paper jam in the fixing unit when printing or copying back-to-back, here are some steps you can take to try and resolve the issue:

1. Turn off the printer and unplug it from the power source.
2. Open the front cover and remove any visible paper jammed in the printer.
3. Check the paper tray to ensure the paper is loaded correctly and not exceeding the maximum paper capacity.
4. Check the paper path for any debris or torn paper that could be causing the paper to jam.
5. If you find any debris, clean the printer thoroughly with a soft, dry cloth.
6. Check the fixing unit for any damage or obstruction.
7. If you are still experiencing a paper jam after taking these steps, it may be necessary to contact a technician for repair.

It is important to avoid forcing the paper out of the printer, as this can cause further damage to the printer. Additionally, be sure to only use the recommended paper types and sizes for your printer to avoid paper jams.

If the inner finisher on your Canon IR-2535 doesn't return to the home position at times and there are no error codes displayed, there are a few potential causes and troubleshooting steps you can try:

1. Check for any obstructions: The inner finisher may be blocked by a paper jam, debris or foreign objects. Check the finisher carefully and remove any obstructions.
2. Check the finisher sensors: The finisher has sensors that detect the position of the finishing unit. If these sensors are dirty or blocked, they may not function correctly. Try cleaning the sensors with a dry cloth.
3. Check the finisher motor: The inner finisher is powered by a motor that moves it into position. If the motor is not working correctly, it may cause the finisher to malfunction. You can try checking the motor and replacing it if necessary.
4. Check the finisher control board: The finisher also has a control board that may malfunction and cause the finisher to stop working correctly. If none of the other troubleshooting steps work, you can try replacing the control board.

It is important to note that opening and working on the inner finisher can be dangerous, so if you are not experienced in working on office equipment, it may be best to call a professional for assistance.

Check to see if a ribbon cable is incompletely plugged in. https://support.usa.canon.com/kb/index?page=content&id=ART111409 https://www.copytechnet.com/forums/canon/152879-e000733-0000-canon-ir-adv-c2230.html

Canon ir 6000 error code : e245-002

The E000202-00010 error code on your Canon IR C3226i typically indicates an issue with the Fixing Assembly Unit. You may need to replace the Fixing Assembly Unit in order to resolve this issue. Alternatively, if you are comfortable performing advanced troubleshooting with your machine, you can check the Fixing Relay PCB and check for any loose electrical connections.

Question edited for clarity.

Canon iPF5000 - Error Code: 03800500-2F30 - Printcopy.info

https://printcopy.info > code=03800500-2F30 Code: 03800500-2F30; Description: Head management sensor error. The head management sensor detected a ink discharge error. A sensor sensitivity error was ...

Error Code IPF8000 Error 03800500-2F30 - Copytechnet

https://www.copytechnet.com > ... > Canon Mar 1, 2013 - Hi My IPF8000 showing 03800500-2F30 error code. I am using this printer since 2008. Pretty familiar with the machine inside and out. Canon iPF-710 error 03800500-2F30 - Copytechnet Jul 20, 2020 Canon imageProGRAF IPF770 Nozzle POS Check Fail 2F30 ... May 2, 2018 Canon IPF 8100 errors - Copytechnet May 23, 2017 Canon IPF 8000 wasting ink and error - Copytechnet Jun 21, 2012 More results from www.copytechnet.com