The error code "22.0;10" on an HP DesignJet T610 44-inch printer indicates a problem with the printer's ink supply station. Specifically, it suggests an issue with the Ink Supply Tubes System.
The error code 90020503 on an HP Deskjet 960C Series printer typically indicates a paper jam or an issue with the paper feed mechanism. Here are some steps you can take to resolve the error:
Check for paper jams: Open the printer's access doors and carefully remove any jammed paper. Make sure to check all areas of the printer, including the input and output trays, as well as the rear access panel.
Clear any obstructions: Look for any foreign objects or debris that may be blocking the paper path or causing the error. Gently remove any obstructions that you find.
Reset the printer: Turn off the printer, unplug it from the power source, and wait for a few minutes. Then, plug it back in and turn it on. This will perform a power cycle, which can often resolve temporary issues.
Check paper condition: Ensure that the paper you are using is not wrinkled, folded, or damaged. Straighten out any curled edges and make sure the paper is properly aligned in the tray.
Adjust paper guides: Verify that the paper guides in the input tray are adjusted correctly to fit the size of the paper being used. Improperly adjusted paper guides can cause paper jams or feeding issues.
Clean the paper feed rollers: Over time, paper dust and debris can accumulate on the paper feed rollers, causing them to slip and result in paper feed problems. Clean the rollers using a lint-free cloth lightly dampened with water or isopropyl alcohol.
To obtain a wiring schematic or service repair manual for the HP Officejet Pro L7780 Printer, I recommend reaching out to HP directly. You can visit the HP Support website and navigate to the product support page for the L7780 printer model. There, you should be able to find relevant documentation, including service manuals or wiring schematics, that can assist you with your specific needs. HP's official support channels are the most reliable sources for obtaining accurate and up-to-date information for their products.
These videos might help
The blue shadow problem you're experiencing with your HP Scanjet G2710 scanner could be caused by various factors, including issues with the scanner hardware or settings. Here are some steps you can take to troubleshoot and potentially fix the problem:
1. Clean the Scanner Glass: Start by cleaning the scanner glass thoroughly. Use a lint-free cloth and a mild glass cleaner to remove any dirt, smudges, or debris that may be affecting the scanning process. Make sure to clean both the main glass and the small strip of glass used for scanning smaller items.
2. Check Scanner Settings: Ensure that the scanner settings are configured correctly. Open the scanning software on your computer and verify that the color settings, resolution, and scan area are appropriate for your needs. Adjusting these settings might help alleviate the blue shadow issue.
3. Update Scanner Drivers: Visit the HP support website and check for any available driver updates for your Scanjet G2710 scanner. Download and install the latest drivers to ensure compatibility and optimal performance. Outdated drivers can sometimes cause scanning issues.
4. Test with Different Software: Try scanning with different scanning software to determine if the issue is specific to a particular program. If the problem persists across multiple software applications, it is more likely a hardware issue.
5. Check the Flat Cable: Inspect the flat cable that connects the scanner head to the scanner motherboard. Look for any visible signs of damage, such as cuts, fraying, or loose connections. If the cable appears to be damaged, it may need to be replaced. Contact the manufacturer or a qualified technician for assistance with replacing the cable.
6. Contact Manufacturer Support: If the issue persists after trying the above steps, it's recommended to contact HP customer support for further assistance. They can provide you with specific troubleshooting guidance or advise on any necessary repairs or replacements.
When contacting support, make sure to provide them with detailed information about the problem, the steps you have already taken to troubleshoot, and any error messages or patterns you have noticed. This will help them diagnose and resolve the issue more effectively.
Try uninstalling your PDF program, reboot and reinstall the latest version. It may be the way it is parsing the colours, if the Printer Test Page printed okay.
Unplug machine for awhile then plugback. It may reboot..remember its a computer n needs dailyrest. Also any connecting plugs on machine shud b done the same....debris gits on the pins causin bad contact. Make sure fan is workn rite
Likely one of these components has sustained some damage from the impact. The heating element inside the fuser assembly is porcelain and will crack easily. Cooling fan is stuck from damaged or misaligned fin, or the laser scanner assembly isn't spinning up properly. Any of these components can fail and the printer still seems like it's about to print but stops.
It sounds like you are experiencing a hardware issue with your HP OfficeJet Pro 8600 printer, specifically with the printhead. Here are some troubleshooting steps you can try:
Power cycle the printer: Turn off the printer, unplug it from the power source, and wait for about 1 minute. Plug the printer back in and turn it on. This may help to reset the printer and clear any errors.
Remove the printhead and cartridges: Turn off the printer, open the front cover, and remove the printhead and all the cartridges. Clean the printhead with a lint-free cloth and distilled water. Be sure to let the printhead dry completely before reinserting it. Reinstall the printhead and cartridges and turn the printer back on.
Reset the printer: Follow the steps for a full reset from the service menu, but before turning the printer back on, disconnect the printer from any network or computer connections. Turn the printer back on and try to print a test page.
Replace the printhead: If the issue persists, it may be necessary to replace the printhead. Contact HP support for further assistance and information on how to order a replacement printhead.
Note: Using refillable cartridges can sometimes cause issues with the printer and may void the warranty. It is recommended to use genuine HP cartridges to ensure the best performance and reliability of your printer.
HP Printer users faced trouble when they setup HP Printer with the computer. Follow the steps to setup your HP 3830 desk jet printer.
Step1: Unpack your printer and connect to power
Step2: HP Easy Start Printer Setup Software
Step3: After printer setup, add this printer to your HP Support Dashboard
