Top 20 Nostalgia Electrics HKP200 Popcorn Maker Questions & Answers

I found your owner's manual here: http://nostalgiaelectrics.com/?wpfb_dl=155 Took a fast look through it and found no reset switch. However, there is an automatic lock. Just hit the cancel button and within 2 minutes, use your unit.

Water line may be frozen, heat it with a hair dryer, see if water then flows.This can happen if aair flow to bottom of frig is blocked.

Double check the kettle is plugged in tight, otherwise there are no repairable parts on Nostalgia poppers.

i lent mine out and it came back without a cord , found one on a old burnt out pitzelle iron that worked in my pile , it's just not as long as the original lesson: look at your other appliances you might allready have one !!

What would you like to know.

There are no parts available for Nostagia brand anything, anywhere. Replacing the popper with a better brand is your only choice.

http://www.nostalgiaelectrics.com/default.asp?c=4 the customer support has an option to dl a manual.

Nostalgia does not have repair parts, return the machine to where you bought it.

need a manual for a oster pro. popcorn maker serial # 2003398/ intertek

ManualAbove is the link to the manual for the RPK630.

Do you known which color you need?

Bruce

mypopcornmachine.com has info

Maybe this will help. Not sure what the model is your looking for.

http://kitchen.manualsonline.com/manuals/mfg/nostalgia_electrics/nostalgia_electrics_corn_popper_product_list.html

make and model to help you please

Hi

I will advice that you buy online visit www.eBay.com or any other online super-mart by searching through Google.

Common mistake. Handle has reverse thread. Screw it on backwards. This is a safety measure. Hope this helps.

no you put it in the top over the holes and dont put the plastic cap on. you put the butter on there after the popcorn is done popping

Problem solved...

??? for what !

Most of this machines have a bowl at the bottom, and 2 or 3 plates above it with a tube in the middle, if it does look like this first melt some choocolate and put it in the bowl at the bottom. dont start the machine yet!! fill the bowl to about 1 cm under the top of it, then turn the machine on, after a few (1 - 10) seconds the chocolate comes out on the top of the upper plate and pours down over the plates below it, back into the bowl underneath it.