20 Most Recent Creative Labs I-Trigue 2.1 3300 Computer Speakers - Page 9 Questions & Answers

reload your music library from a computer

creative speakers not working.even though power button on the led not glowing. today morning properly worked but suddenly not working light not glowing. send me solution to my mail [email protected] tan q

The fuse might be blown.


Check if the wire in the fuse tube is broken.
Replace it with another one with same rating. Generally spare fuse is provided with the products.

Hi, you can call parts express on 1-800-338-0531 to get the replacement part,

jp212 needs replacing on the pcb.

You may visit any authorized reseller and for sure, they have the part that you need. You may also check Amazon.com, Tiger Direct, Frys Electronic, etc.

Thank you and good luck!

It should have little if any effect on the monitor, LCDs are not nearly as sensitive about EMP as CRT monitors were

Sir,

Go to control panel -> double click sound and audio devices. check all the setting relating to sound adjustment. check also this option will be enable "use this device(enable)"

Thanks
good luck

There are actually a few programs you can download that will converter itunes to mp3 format for free.

http://askbobrankin.com/convert_itunes_to_mp3_format.html

or

http://www.wmatomp3-converter.com/guide/Convert-iTunes-video-M4V-to-AVI-WMV-MPEG.html

or

www.melodycan.com/download_page.html

or

www.convert-any-media.com

the zens come with a software bundle and that is what transcodes videos into a playable format.
click here for zen ez 300 software download
If you need further assistance please feel free to follow up with a comment and i will be here to assist you. If this assisted you please feel free to rate the comment. thanks and have a great day.

If you mean low bass, then you can adjust with the bass controller to reduce the limit of the bass frequency. Check to see the woofer mountings are firm, the wires are intact and if possible reverse the connection and try again. If you are not happy try with another woofer or get your woofer checked with a system at your friends to confrim if the woofer itself could be the issue. If so chcek for the suspension of the woofer, rubbing of the voice coils or the spider being loose.You can repair the woofer by using a good glue to fix or to change the suspension . Hope you try. Good day

My dear friend, You must call up your local employment exchange to register. Further you can look into the sites like' jobs.com; india jobs.com ; naukari.com etc.
I hope you will get one also at the local technopark located near to your place.
Good luck

Hi, what causes error when upgrade is done is If the update process wasn't finished,or the Software your using is either not the actual software orthe software is corrupted.

Go to the site of the make of mp3 your using and get the proper software for upgrade.

And you can also check if the battery of the mp3 ;layer is ok,that might be the cause too.

Take care.

ok but if you able to change the bettery, the probem will be solved. or there is no other option, you can sell it and buy new one if you like.

My zen got stuck like that, and I could never make it work again, but it was an older one. Now creative came out with a recovery tool, click here to check it out, hope it helps

http://www.creative.com/products/mp3/MP3PlayerRecoveryTool/welcome.asp?