20 Most Recent
D-Link AirPlus DI-524 Wireless Router - Page 2 Questions & Answers
Dir-501 firmware
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.
Cannot access http://192.168.0.1
Well the fact is this happens on most routers i have a dlink router does it all the time.
The best solution ever is to go to the router and reset it with a pen or paperclip. hold it for 20 seconds turn it off then turn it back on. and it works!
But to bad its 5:07 in the morning for me, i have school tommoro[today] the router is in there bedroom.
mmm....
Got a solution for that?
--- THANK YOU SO MUCH! BEST SOLUTION! BASIC YET GENIUS!
When I connect my modem
Some Internet Service Providers limit the number of computers that connect to the modem, namely to just ONE. This limiting can be done either "inside" the cable-modem (turn it off to reset the counter to zero) or by the I.S.P. by using a unique identifier,
namely the 'MAC-address' of the network-interface (the router has one MAC-address, and your computer has a different MAC-address).
Contact your ISP, and get Technical Support from them, i.e., disconnect your computer from the modem, connect the router to the modem, and your computer to the router, and get them to "authorize" the MAC-address of the router to get Internet access.
Password samsung sgh g800
Reset the device to "factory" settings.
Then, you can set the SSID and the password for the router.
How to block and unblock websites thru the router
go in the web interfae for your router.. to find it click start then run.. in there type cmd... in the new window type ipconfig... look for the line default gateway will look like 192.168.2.2... type that number in a web browser address bar ... the web interface will be on your screen.. to black a web site go in url filtering add the site address.. save the settings ..
What is the password to reset the di 524 router
From D-Link
Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).
Step 2: Enter the username (admin) and password (blank by default), and then click Ok or Log In .
If that doesn't work you will need to reset the router to factory default settings.
What is upnp on my router?
Its a networking architecture that allows your router to auto configure with other devices that also use upnp. I normally leave this disabled. Some security vulnerabilities have been found with the protocol.
Slow wi fi speed
check if u can get closer to the router or if your device can see the router without any walls in between try to get closer to the router as much as possible
Not finding what you are looking for?