20 Most Recent D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point Questions & Answers

Under Windows 7, press the "Start" button. Type 'cmd' into the search-box, and press ENTER. Type 'ipconfig /all', and press ENTER. Look for the IP-address for the "gateway" (or "DHCP-server"). Type that IP-address into your web-browser.

Your printers should print, if the "wireless" part of your router is working -- printing does not depend on having a WAN connection.

Under Windows 7, press the "Start" button. Type 'cmd' into the search-box, and press ENTER. Type 'ipconfig /all', and press ENTER. Look for the IP-address for the "gateway" (or "DHCP-server"). Type that IP-address into your web-browser.

If it is under warranty, exercise the warranty to get it replaced.

Replace it.

Connect your computer to the router. Under Windows 7, click the "Start" button. Type 'cmd' into the search-box, and press ENTER. Enter 'IPCONFIG /ALL'. Look for the IP-address of the "gateway" (or "DHCP-server"). Type that IP-address into your web-browser.

See D-Link's support-site: ftp://ftp2.dlink.com/PRODUCTS/DWL-2100AP/REVA/ and download the documentation.

hat type of connection do you have? if you connect everything and put 192.168.0.1 in the address field in the browser you will be taken to the dlink router setup page. the default username is admin and the password is admin. from there you should see a setup link.

Hi,For D-LINK default password you can try one of these:Username: adminPassword: adminUsername: adminPassword: blank (just press enter after typing in the username)Username: adminPassword: password

To configure the modem properly, you should refer to the user manual. It has all the settings detailed as well as a troubleshooting list: Link DWL 2100AP user manual

Have you tried unplugging and plugging the power supply back in? If that doesn't help, try to check the manual for power issues: Link DWL 2100AP user manual

After resetting, go to the connection icon in the task bar > status > properties, then under TCP/IP properties select Use the following IP and use the following: IP: 192.168.0.66 Subnet: 255.255.255.0 Default Gateway: 192.168.0.50 After that you should be able to change the settings through your Internet Explorer by visiting 192.168.0.50. Make sure to also refer to the user manual for your device for more information: Link DWL 2100AP user manual

after reset the wireless device you can connect only through 192.168.1.1 or 192.168.0.1 IP address.

drivar

copy and paste this link into your browser ftp://ftp.dlink.ru/pub/Wireless/DWL-2100AP/Description/DWL-2100AP_Manual_210.pdfit shows how to factory reset your access point on page 84