Top 20
Leisure DWLT65 Dishwasher Questions & Answers
Not emping water
This is a generalize answer, but remove the bottom kick panel to manually rotate the pump motor. In general they can get locked up by objects. Locking up the pump.
My leisure dwlt65 dishwasher keeps switching its self off when going till wash
see this causes and fix it. God bless you
Touchpad and Control Panel
If the buttons don't work on the control
panel the entire touchpad and control panel assembly may need to be
replaced. If the display works but the dishwasher functions are all out
of synch, or some of the buttons don't respond properly the entire
touchpad and control panel might need to be replaced.
Touchpad
If the buttons don't work on the control
panel, the dishwasher touchpad might be at fault. Generally speaking, if
the dishwasher display is working and some of the buttons respond
correctly but some don't, the problem is with the touchpad.
Main Control Board
The dishwasher has a main control board which
regulates nearly every function in the dishwasher. If the control panel
buttons don't work, and other causes have been have ruled out, the main
control board might need to be replaced.
WINTERHALTER MODEL MTR3 GIVE ME ERROR 22.2 AND ERROR 12.1
These error messages both point to a sensor problem.
Error 12.1
This error is related to the boiler temperature sensor. Consider the following:
Look for a short circuit in the sensor. Inspect the cables and plugs for any issues.
Ensure the sensor is correctly connected.If needed, replace the boiler temperature sensor.
Error 22.2:
This error pertains to the tank temperature sensor. Possible causes include:
Short circuit in the sensor.
Cable failure or plug failure.
Sensor not properly connected.
You may need to check the sensor wiring, connections, and replace the temperature sensor if necessary.
3/25/2024 10:21:59 PM •
Dishwashers
•
23 views • 3 helpful votes
HOW TO REPAIR A HOLE IN MY DISHWASHER
It depends upon the material you are trying to repair but Araldite or any good quality two part epoxy will suffice to fill the hole.
Ensure the area is dry and clean then build up the repair . Larger holes will require multi additions of epoxy.
4/15/2024 8:50:33 PM •
Dishwashers
•
16 views • 0 helpful votes
Can't get dishwasher out from underneath the counter
Question edited to move it from Computers to Dishwashers.
Is there by any chance a floor tile 4" out from the dishwasher front? If so, try lifting the front with a crowbar or long screwdriver.
Did you disconnect, inlet hose, drain and power? They may have been installed tight, or clipped.
..
4/19/2024 4:03:34 PM •
Dishwashers
•
13 views • 0 helpful votes
Not finding what you are looking for?