Lanier LF310 - Page 7 - Answered Questions & Fixed issues

Press C00C or C interupt key 0 interupt key and 41 for developer counter display 42 for developer counter clear 46 for exposure level adjustment 72 for maintenance preset counter setting 25 for automatic developer adjustment. 40 for developer preset counter display.

Click on start button, and then click on printers and faxes. If you do not see your printer listed, click on add printer, and follow the instructions to add your printer

Make it the default printer, and then it will come up for all print jobs

error code E000732-0001 on Canon

You can change the time setting by pressing "UserTools" the selecting "System Settings" and then selecting "Timer" settings. There you will find the time setting.
If you do not have a manual for your copier you can download it here:
http://www.lanier.com/downloads/Default.aspx?hbn=manuals

Try opening up your web browser and type in the ip address of your lanier.
You should to access the facsimile function located on the left side. Once youre in the facsimile function, you should see a thumbnail view of the faxes stored in your lanier. Simply click on the faxes and delete them.

contact your local lanier dealer and tell them what you need. beware though the 5645 is a few years old, it may not be available

Hello sir; A-1 code means discharge corona cleaner problem, check it up may be the cleaner not function right.

If it is new call a local dealer to see if they can fix it.
If it is old, the machine might be out of service life. Tryto get a 3rd party service repair person to see if the person can repair the machine.

Clean the paper feder rollers to use izopropilic alcool.

you need to have the scan option. the nic option . print option. you need the the machine being able to print. after that create a folder that is shared on the pc. get the name of the pc. on the machine browse the network, find the pc and search for the folder. this is the shortend version. now you can scan to the pc

your printout is only 1/2 the page than your image may not be developed or transfered. you will need to remove the deveolper unit and look at the front of it. does the devolper go all the way across the front of it?

did you turn the dial to light the display? if so the back lights are out on the display or the ballest is bad. you need to replace the diaply. have a tech come out.

Here the link to the website where you can download technician service manual in .pdf format for this model:
http://www.smpcshop.com/3550-p-1389.html

could be a failed ccd unit or it needs the charge corona replaced or the drum replaced

the fuser needs to be checked. you need a tech

Set the maintenance counter:perform test command 72.Press C - interrupt key - 0 - interrupt key - 7 - 2 - PSW.The currently set maintenance cycle code is displayed and the ready lamp lights up.After the ready lamp lights up anter the set code corresponding to the maintenance cycle mode.0 = 10000 sheets ; 1= 15000 sheets ;2=30000 sheets.See the toner full detection part and remove the wastw box,change it.Perfor the test command 14.This command used to cancel troubles other then U1 and U2.After cancellation of trouble the test command is also cancelled automatically,also used to cancel toner full detection the maintenance lamp blinking.

Press "clear/stop" and "8" at the same time. An error code will be displayed in the copy quantity window as long as those two button are held down. What is the error code? Each code is specific to different areas of the copier. I will be more than happy to assist you in resolving.

this is a problem with the thermistors and will need a technician to come out and fix it for you, the part #'s are aw100052 and aw100053 for the thermistors but you have to enter service mode to clear and reset the code.

if this answers your query please rate my answer accordingly

Regards

If paper is loaded in the portrait orientation, 8 1/2 x 11 paper...32 cpm.

Press "clear/stop" and "8" at the same time. An error code will be displayed as long as these two buttons are held down. What is the error code? Let me know, please.