20 Most Recent Lanier LF310 - Page 4 Questions & Answers

Lubricated the bushings on the black foam roller on the inside of the right hand door. Toner leakage is unrelated unless the drum unit gears are causing the noise, in which case, it must be replaced.

select manually on the panel.

SP Mode 5832-001

That code is usually a problem inside the laser unit - the polygon mirror motor.

What model?

That is from a dirty thermistor in the fusing unit. It is the one touching the pressure roller.

Depends on the associate engine code. Most of the time it means that maintenance is overdue. Otherwise, it is an electronic issue.

The error code is not related to the toner. What model?

Metal tab on right side of copier is bent and correctly touching the duplex unit interlock switch. Open the duplexer and notice the metal tab stick out. Put back to a 90 degree angle.

That is the master clamper area. Take off the rear cover. From the rear it is on the right. There is a motor and a rack gear that moves to open the drum master clamper when removing and loading a master. With the back cover removed, try to make a master while watching that assembly. You can also put the drum in and drive the motor by hand to watch and see if opens the drum clamper.

Its the brown belt thing on the right door, take off the 2 springs and remove the belt assy and empty, very messy...-Carl

The LD-620 appears to be a Ricoh Aficio MP-C2051 or C2551. You should be able to find a parts list on the net. Whichever one looks the same as your lanier (who don't make anything) will be the one. Good luck

Heat roller error

Laser sync error, bad mirror motor?