20 Most Recent Symbol Spark LS 1004 Questions & Answers

What barcode scanner do you have? USB, SERIAL or ps2.

by the way. the old computer is it like NCR, SIEMENS or IBM because then you need to re-program your scanner.

i found a manual where you can set your pc type with barcode scanner. be careful not to scan reset defaults. because you will loose your settings.

look at chapter 4-9 and 4-10

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3380601bpdf&sliceId=&dialogID=33708056&stateId=0%200%205522749

If you don't know ask me. we don't want to lose al the settings.

good luck

Here is what I did to fix the problem of the bar-code scanner not going to next line after a successful scan. (Symbol ls4000i,This fix should work for other models as well)1. Get the manual for your scanner or here is a link to the Symbol LS400i https://docs.symbol.com/manuals/3789802a.pdf You will want to print off few pages that have the proper bar-codes for programming.2. I usually start with setting scanner to the Default Parameter, this should be in section 5-7,page 50 of the manual.PRINT ITWarning! If you set scanner to default, you need to be aware of which bar-code types you use. (We use UPC-A) Also if you have it programed for other things already you may not want to set all settings to default. You can skip to step 4. If you do not wish to reset all values to default.Now scan the Default bar-code.3. Now program scanner to Enable your bar-code type. (For us Enable UPC-A bar-code is in section 5-22,page 66. PRINT IT Now Scan the Enable (your bar-code type UPC-A, UPC-E,etc etc) 4.Next You need to set a Suffix Value. The scan Suffix bar-code is found in section 5-80, page 124. PRINT ITNow Scan the Scan Suffix bar-code This prepares the scanner for the code of the whatever Suffix you want to add.5. The Suffix you want to add to fix this particular problem is ENTER. So that it goes to the next line. There is a prefix/suffix value chart on page 162 table A-4. The code for ENTER Is 7013. In order to enter this code you will need to print off the Numeric Bar Codes found in section 5-109,5-110,pages 153,154. PRINT ITNow scan in 7013 one number at a time to program ENTER as the suffix.6.Now you have to program the Scan Data Transmission Format found in section 5-81,5-82, pages 125,126 . PRINT IT(This lets the scanner know to transmit the Suffix after the data.)First scan the Scan Options Bar-code.Second scan the <DATA><SUFFIX> bar-code.Last scan the ENTER Bar-Code. YOUR DONE !Your scanner should be working now. Also look through the manual there are some nice functions that can be turned on and off with a simple bar code scan. Such as volume and tone of beep etc etc.Hope this helps Nate N7w7

The host type are the Interafces which are supported by the scanner directly (no adapter needed). And the Synapse adapter can even an old scanner connect to new interfaces like USB.
As you state you have the adapter for keyboard wedge. You would just need to download the Reference Guide for the "Synapse Smart Cable" at support.symbol.com a configure it acccording to your connection parameters.

1992 Oldsmobile Cutlass Supreme FWD 3.1 liter DOHC V-6 VIN "T"




1992 Oldsmobile Cutlass Supreme FWD 3.4 liter DOHC V-6 VIN "X"




Hope help with this (remember rated this).

There should be an option to "insert" a carriage return after reading the bar code. I believe that turning that option on will resolve your problem.

Dan

Here at Legacy Global we can help you. Call Diana at 1-847-750-9231.

Here at Legacy Global we can help you. Call Diana at 1-847-750-9231.

Here at Legacy Global we can help you. Call Diana at 1-847-750-9231.

What do you mean? you can only scan not more than 3 times? If that so,you need to change the setting of your scanner there was a limit numbers to scan. You can check by using the manual of that scanner.

Hope you like my solution please rate me SOLVE.

Best regards,

Philip

'Internet Explorer' probably has a problem. Use Chrome or Firefox.

If your Kenwood 1 ton inverter AC is having trouble starting and sometimes shows the compressor symbol before turning off, there may be a few things you can check to diagnose the issue.

1. Power Supply: Check that the AC is receiving proper power supply, and the circuit breaker is not tripped. Sometimes, due to voltage fluctuation, the compressor may not start.
2. Dirty Air Filters: Check the air filters and clean them if they are dirty. Dirty air filters can reduce the airflow and cause the AC to malfunction.
3. Faulty Thermostat: If the thermostat is faulty, it may not be able to detect the temperature properly and cause the compressor to not start. You can check this by setting the temperature to a lower level and see if the AC starts.
4. Low Refrigerant Level: Check the refrigerant level in the AC. Low refrigerant levels can cause the compressor to not start.

If none of these steps solve the issue, it may be best to contact a professional AC technician to diagnose and repair the issue.

There are a few different ways to type the degree

1. Use the keyboard shortcut: Press and hold the Option key, then press the letter K on your keyboard. This will insert the degree symbol.
2. Use the character viewer:

• Go to the Edit menu and select Emoji & Symbols.
• In the search field, type "degree".
• Double-click the degree symbol to insert it into your document.

1. Use the ASCII code:

• Press and hold the Option key and the Shift key.
• Press the number 8 on the numeric keypad. This will insert the degree symbol.

I hope this helps! Let me know if you have any other questions.

no info generic answer --have battery and alternator tested--check belts and connections

Hi, Please reach out to videocon on twitter to help take care of this issue: @VideoconIndia . You can tweet their handle with the issue included. You can also call 1800 1370 444 to reach them. I believe that is a number based in India. Thank you.

Use " Scanner update utility " to update the firmware. after this try to configure scanner with " 123 scan utility " https://www.zebra.com/us/en/support-downloads/scanners/general-purpose-scanners/ls4278.html#pageandfilelist_895c