20 Most Recent Samsung PN51D7000 3D Plasma TV - Page 5 Questions & Answers


Right beside the standby light. On all TV's.

Samsung... | Answered on Jul 13, 2019


Did you do a volt test on the power board? From the power board ribbon to the TV main board? The voltages are written down on the power board side. The standby power should be 3.3v or 5v. sound 24v main power 12vx2. Let me know.

Samsung... | Answered on Jul 13, 2019


Dear, Try to check any track open or any connection open in the main board which is the cause of video issue .

Samsung... | Answered on Jul 13, 2019


if code doesnt pop up during programming or the samsung general codes not working then notify dish

Samsung... | Answered on Jul 13, 2019


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Samsung... | Answered on Jul 12, 2019


Connect to another HDMI input to see if it works.

Samsung... | Answered on Jul 12, 2019


Use the audio out jacks on the side or rear of your set .Go into settings and choose the audio output.

Samsung... | Answered on Jul 12, 2019


Check power supply voltages, If ok, probably TCON board.

Samsung... | Answered on Jul 12, 2019


Check power supply output voltages. It sounds like a power supply board problem. Voltages should be tabled on board. Pop noise was probably a capacitor blowing up. Look for tubular component with the end popped out.

Samsung... | Answered on Jul 12, 2019


What is the Model number that is Printed on back of TV and Serial# when I run the # 32A450
it is not showing as a Samsung?

Samsung... | Answered on Jul 12, 2019


Samsung LCD / Plasma TV Capacitor Repair Kit ...

www.amazon.com > ... > Capacitors

Amazon.com, Inc.
Rating: 4.4 - ‎86 reviews
Samsung LCD / Plasma TV Capacitor Repair Kit, Replacement Parts: ... 1-220uf 25v; 4-2200uf 10v; 6-1000uf 25v; 6 Inch Solder and Solder Wick; Cleaning Swabs ... pump + Solder wire + Solder wick + CAPACITORS Replacement)-COMPLETE KIT ... In my case, the OEM capacitors did not look bad, but I replaced them all ...

Samsung PN51D530 Plasma TV Repair Kit, Capacitors ...

www.amazon.com > ... > Capacitors

Amazon.com, Inc.Samsung PN51D530 Plasma TV Repair Kit, Capacitors Only, Not the Entire ... Save on the full line of Powerblanket heating solutions. ... and 8 inches of 0.1 inch (2.5 mm) copper de-solder wick are included in the kit. .... Made Easy · Look.com

EASY MOST COMMON TV REPAIR EVER!!! - YouTube

? 13:13
https://www.youtube.com/watch?v=SXqSg2A5b7I
Jan 6, 2012 - Uploaded by Tampatec
Must See TV FIX EASY COMMON Samsung TV Repair Repairing LNT LCD PLASMA TV FIX SERVICE VIDEO TUTORIAL ... if you go to get tv repair kit- http://tampatec.blogspot.com/ easy ways .... The YSus/Zsus boardlook to be ok but I'm wondering if I need to replace the YSUS board> Any thoughts?

Samsung... | Answered on Jul 11, 2019


Reset your TV.

With the power off - use the remote and push mute + 1 + 8 + 2 + power button.
When the set turns on, you will see a menu pop up. Just hit enter on the remote and you will see Factory reset. Hit enter again and the TV will reset.

Samsung... | Answered on Jul 11, 2019


Your T-com board needs to be replaced. That will fix the picture problem.

Samsung... | Answered on Jul 10, 2019

Not finding what you are looking for?
Samsung PN51D7000 3D Plasma TV Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PN Samsung

  • PN Samsung

Most Popular Question

samsung plasma blinking red light tv

  • Televison & Video
Loading...