Top 20 Toshiba Satellite M45-S165 Notebook Questions & Answers

why you not try to select last known good configuration. it will fix your blue screen error. it is may be a registry error or driver configuration error,but if you can fix disk errors with chkdsk command after select safe mode with command line. chkdsk c: /f

hallo how can i clear bios password in toshiba sattlite m840

The only factory reset on a computer is in the BIOS, which you select after it shows the manufacturers logo or name. It will usually display the key to press and say SETUP. On Dell is F2, some are the Delete key.Windows 8 will also do a factory reset which will pretty much do a clean install like when it was first installed.If you do a reset on the BIOS and your Windows does not come up and possible blue screens with a STOP error, go back into the BIOS and on the drive type, switch it from AHCI to ATA. It should then boot fine.

http://download.cnet.com/wireless-atheros-ar5b91-7/3000-2112_4-202570.html http://download.cnet.com/Realtek-RTL8139-Family-PCI-Fast-Ethernet-NIC/3000-2112_4-91313.html if these packages are not the right http://download.cnet.com/2000-20_4.html On the home page you should see a search tab just type in what you are looking for tick in the box for windows software or all software box IE: Motherboard name Wireless or Ethernet driver you might have to try a few times to get it right Hope this helps.

http://www.cgsecurity.org/wiki/CmosPwd If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Four beeps indicates -The system clock/timer IC has failed or there is a memory error in the first bank of memory.Try replacing the CMOS/RTC battery (consult your manual), if it does not help, you might need a new motherboard.Good Luck!

Four beeps indicates -The system clock/timer IC has failed or there is a memory error in the first bank of memory.Try replacing the CMOS/RTC battery (consult your manual), if it does not help, you might need a new motherboard.

http://www.irisvista.com/tech/laptops/ToshibaM45/Satellite_M45_disassembly_1.htmYou can click on any photo to enlarge it.Step 3 photo shows the Memory Compartment. Two ram memory (SO-DIMM) can be used. There are two ram memory slots.1GB however, IS the largest amount for EACH slot.Regards,joecoolvette

What liquid did you use to clean it? Only mild soapy water is suggested, other cleaners can damage screen. If you press to firmly on an LCD Screen, you can cause this also.

Hi
There are a lot of reasons,
First of all, try to unplug the battery, hold the power button for 30 seconds,
then plug in the charger.
If the notebook boot, then plugin the battery and try to boot it.
If booted , then N!ce, you've done it.

If not, it seems the battery have problem,

Let's see, try it and tell us your result.

Regards.

It really depends if it is integrated into the motherboard or if it is a separate board with the power/function buttons on it. If you've never replaced anything more than the RAM or a HDD then I would not recommend attempting it yourself.
How have you come to the conclusion the power button is the problem? If it is not powering on this can be due to the battery, A/C adapter, a bad DC jack, bad motherboard, a computer lock up among other issues.

Comment back if you need more help.

It appears the recovery partition has been removed from your hard disk. You need to obtain a Recovery CD from Toshiba.
OR
If you have a Windows XP Home installation CD then you can use it to reinstall Windows on your Toshiba and the product installation code will be on the Windows label on the bottom of your laptop.

You can download thedevice drivers for your model laptop from the Toshiba WEB site from theirdownload page. Make sure you enter the model of your laptop so you can get thecorrect drivers. Please click on this link: - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsphttp://blitware.com/adpages/driverfetch/manufacturer/?manufacturer=Toshiba&gclid=CMOVxNCBx6ACFSgnawodoHNGbA

Hi,
This can be a power supply or motherboard problem.
Hope this helps.

go to inter net explore type u r site address

eg:-www.google.com ,www.fixya.com

Assuming Windows, go to Control Panel, then User Accounts. Create a new user with administrator privileges. When ready to install the new app, right click on the install and choose Run As, then chose the new admin enabled user.

That's the safest method.

Hi,

Welcome to fixya, how may i help you?

Do not hold the power button down while pressing the "0" key - it'll shut the computer off again. You just need to push it once to turn the power on and then hold the "0" key immediately after you push the power button on - just like turning on the laptop, but this time you're holding the "0" key down.

hello
you need a drivers of sound from here http://www.driverspit.blogspot.com/