20 Most Recent Jabra BT250 Consumer Headset - Page 3 Questions & Answers

They are available directly from Jabra.

http://store.jabra.com

Ear gels can also be found on Amazon.com:

Click here.

Your charger could be bad. Headsets do not usually show any sign they are charging. Leave it for 2 hours on charge then check the charge level as it shows in the owner's manual.

Other pass code for bluetooth is 1234

A search on Ebay for 'minigels will get you some.

The pin # is 0000 for this device.

Check that both devices are in pairing mode and the phone lets the headset connect without asking for authorization.

There might also be a security / firewall issue. You might want to check your phone settings...

Check that the volume level is high. There might be a possibility that the headset has a mulfunction.

You may try to bend the headset slightly to check whether the issue is related to the wires/soldering...

Check that both devices are BT enabled and in pairing mode -ie, leds blinking-. If one of the device is not in pairing mode, it is normal that the process fails.

If you experience the same problem on other phones with your Jabra BCE-250 -same as mine-, you might think of getting it checked first.

Hello due, your battery is dead or the battery circuit has an issue -just as mine-.

You can of course get rid of this problem by yourself if you have some skills...

Check this out:
http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

If it is the circuit, then continue reading...
"The circuit on the internal battery has an issue and I cannot measure the voltage through it correctly. The battery reads 3,55 V, while the circuit reads 0,55 V. So, I have the same problem as above then... A blue flash and nothing else, no charge... I am going to remove the circuit of the battery and connect it directly to the charger pins. I believe this will not cause any issues. At least, I will be able to charge the headset this way. I will post once more should this method fails." This is my solution. And it worked. The headset in the cradle is looking at me with blue light on -charging!- Don't forget to take it out of the cradle after 2 hours as there is nothing there to protect the battery any longer.

check this link for more info on this site

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

This has been answered on this site try this link

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Check Jabra website for manual.

It is a simple hold volumne button up or down when switching on or off to disable /enable it

Battery problem try this link.

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Check the jabra support website and see manual it is a simple hold the volumne button up or down when switching on to disable/enable it

Typical non use problem answer is on this site use this link

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Check the Jabra support site for the manual.
It is a simple hold the volumne up when switching on and then if you want to renable it hold it down when switching on.

[or the other way !!] but that is all.

Try this link to help you on this site it is a battery problem

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Try this link for help and advice.

Then try Jabra support website too.

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Try this link for help and explanation.

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Try this link as others have

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt