20 Most Recent Jabra BT250 Consumer Headset - Page 2 Questions & Answers

Hi, you can use the manual to know how to sync or pair with your cell phone..



http://www.bgolden.com/docs/documentation/Jabra-BT250v_UM_NA_EN_167.pdf

Hope it helped..

im sure Radio shack would def have something like that if your in the US

DOWNLOAD JABRA PC SUITE FROM http://www.jabra.com/CP-CP/support/Pages/JabraPCSuite.aspx THANKS

1. Switch Bluetooth headset off. 2. Press and hold the answer/end button until a solid blue light comes on. Headset in pairing mode. 3. Go into phone's bluetooth options and "search/look" for devices. you should see the headset. 4.Pass code is "0000"
should connect and be good :)
hope this helps

This is usually a problem that can easily be solved if there is no secondary cause of the problem coming from within the device.
All you have to do is to make sure that you charge the device vigorously for at least before trying to switch it on again. Continuous trial would only result in an even worse condition where the battery may die below the expected limit and this would cause serious problem.
On the other hand, if the battery has been inside for a very long time without usage, it can cause the battery to automatically run so flat that it may refuse to charge. In this case you would have to replace the battery with a new one.
Hope this was helpful?

try reseting blue tooth

To connect a jabra 250 to the Nokia 6300: On the Nokia go to menu > settings > connectivity > bleutooth = select and the next line = visible
On the headset when it is off > push the upper button for ± 8 seconds until the lamp is burning constant and release this button.
Choose on your Nokia on the same bleutooth menu > search audio.... It will be pairing in a few seconds . It will ask if it is ok to make the connection. The password is "0000" and push on "yes"
I hope you cann understand my english, I'am dutch.

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

means its fully charged and cant hold any more charge

"0000"

If it is fully charged, press and hold the top button until the blue led light comes on. To get it into pairing mode you need to switch it off, then switch it back on but hold the top button down for 8 seconds until the blue light comes on and stays on

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

Same Problem Here. Restored the 8220 flipphone to factory settings. Dint work either.

The above solution only lacks one small item. Part of the pairing procedure is to hold the on/off button for the recommended 5 seconds to power up, but the light will NOT become constant until you hold both the power button AND the round center button on together until the light remains constant. Then you can pair the two devices.